ESC regulator MAD AMPX 200A
Maximum continuous current: 200A
USD · Volume pricing available
زمرے:
Certifications
Global Shipping 7-14 Days
DHL, FedEx, UPS, Air & Sea
Genuine Products
Authorized distribution
Export License Ready
ECCN, CO, CI, PL, EUS docs
24/7 Tech Support
Pre & post sales
Export Compliance
9A018AI confidence 100% · Export license may be required depending on destination and end-use.
Buyer Tier Benefits
Tier discounts stack with volume pricing. Automatically applied after your first order.
Order the powerful MAD AMPX 200A V2 ESC controller for your professional heavy drone!
Give your truck or industrial unmanned platform maximum power and reliability. The ESC controller MAD AMPX 200A V2 is designed specifically for heavy multi-rotor systems - quadcopters, hexacopters and octocopters used in aerial photography, cargo transportation and agriculture.
The device supports the widest voltage range from 5S to 14S LiPo (20-64V), allowing it to be used in the most demanding power applications. With good cooling, the regulator is capable of operating for a long time with a current of up to 230A, and the peak current reaches 300A. Choose a proven solution for critical missions.
-
Colossal power. 200A continuous current (up to 230A with good cooling) with up to 300A peak for confident lifting of heavy loads .
-
Support 5-14S LiPo. Works with batteries from 20 to 64 V, providing flexibility for high-power systems.
-
Lightning-fast response. Specialized software for quadcopters ensures acceleration from zero to maximum in just 0.28 seconds.
-
Modern interfaces. CAN interface for bi-directional communication with the flight controller and real-time telemetry transmission.
-
Synchronous recuperation. The technology returns energy to the battery when braking, improving overall flight efficiency.
Operating principle and intelligent technology
The MAD AMPX 200A V2 controller is equipped with specialized software designed specifically for high-power multi-pole motors used in heavy-duty drones . Unlike universal regulators, it has algorithms that are perfectly compatible with MAD and other manufacturers' disc motors. The device supports input signal frequencies up to 621 Hz, which guarantees instant response to pilot commands.
The key feature of version V2 is the presence of a CAN interface, which allows you to receive data on current, speed and errors in real time, as well as update the controller firmware. Synchronous regenerative technology not only improves efficiency, but also improves throttle linearity, making drone control more predictable and smooth . Double signal wires (twisted pair) effectively reduce crosstalk .
Technical characteristics and protective functions
| Characteristics | Meaning |
|---|---|
| Direct current | 200 A (up to 230 A with good cooling) |
| Peak current | 300 A |
| Input Voltage (LiPo) | 5–14S (20–64 V) |
| Dimensions (L×W×H) | 117.5 × 56.3 × 42.8 mm |
| Weight (without wires) | ~320 g |
| Housing protection | IPX4 (splashproof) |
| Power wires | 8 AWG / 190 mm (power), 8 AWG / 170 mm (to motor) |
| Interfaces | CAN, PWM, RPM and error output |
| Current consumption | 50–200 mA |
| Operating temperature | -20°C to +65°C |
The regulator is equipped with an intelligent multi-level protection system:
-
Temperature protection: When heating above 125°C, the power is reduced to 50%, at 140°C - complete shutdown.
-
Short circuit and overload protection: Instant shutdown with automatic recovery after 100ms.
-
Signal loss protection: If the gas signal fails for more than 2 seconds, the engines are switched off.
-
Wrong voltage protection: Start blocking when connecting a battery with a voltage below 16V or above 64V with an audible signal.
Specifications
- Supported Voltage: 5-14S LiPo (16-64V)
- Maximum continuous current: 200A
- Peak current: up to 300 A (with good cooling)
- Weight: 190g
- Dimensions: 161 × 72.2 × 46.8 mm.
