Microcomputer NanoPi NEO4

Order the NanoPi NEO4 microcomputer for your most daring projects!

The NanoPi NEO4 microcomputer is an ultra-compact 64-bit ARM computer. The model was created for professional development and embedded systems. It is ideal for AI, robotics and industrial automation.

• Six-core RK3399 processor with a frequency of up to 2.0 GHz.
• Ultra-compact size of only 60x45 mm.
• Supports 4K video and powerful Mali-T864 GPU.
• A rich set of interfaces for any task.
• Ubuntu, Debian and Android support.

Buy a powerful mini-computer for embedded solutions

The NanoPi NEO4 microcomputer is built on a Rockchip RK3399 processor. This is a six-core big.LITTLE architecture with two Cortex-A72 cores. The frequency of large cores reaches 2.0 GHz. Four Cortex-A53 cores operate at 1.5 GHz. Built-in Mali-T864 graphics accelerator supports OpenGL and OpenCL.

Video processor decodes 4K video in H.265 and VP9 formats. The amount of DDR3 RAM is 1 GB. The board does not have a built-in eMMC drive. But you can install the eMMC module through a special slot. Loading is possible from a microSD card up to 128 GB. Power is supplied via USB-C port from 5V/3A. The PCB size is only 60x45mm. The weight of the device is 30.25 grams. Operating temperature ranges from -20 to +70 °C.

A special feature of the model is a rich set of interfaces in a minimal area. The board has one USB 3.0 Type-A port. Two USB 2.0 ports are also available. One USB 2.0 is output to a 2.54 mm connector. USB Type-C port supports OTG and power. Built-in Gigabit Ethernet provides high-speed networking. Wi-Fi 802.11 b/g/n and Bluetooth 4.0 provide wireless freedom. There is a MIPI-CSI connector to connect the camera.

HDMI 2.0a video output supports 4K@60Hz. 40-pin GPIO contains I2C, SPI, UART and PWM interfaces. A PCIe x2 slot is also available for expanded functionality.. All these interfaces make the board universal for any project.

Choose reliable boards from the manufacturer FriendlyELEC

Manufacturer FriendlyELEC is a well-known developer of single board computers. The company specializes in ARM boards for developers and manufacturers. The brand's products are distinguished by high quality and reliability. FriendlyELEC offers open source software and documentation. All boards undergo strict production control. The manufacturer is actively updating firmware and the Linux kernel. FriendlyELEC provides long-term support for its products. The brand's models are popular among developers around the world.

A special feature of FriendlyELEC boards is their specialization for embedded systems. The NanoPi NEO4 model supports multiple operating systems. This is Ubuntu Desktop 18.04 and 20.04. Debian 10 and Debian 11 also available. The board works with Ubuntu Core and Alpine Linux. Android versions 7.1.2 and 8.1 are supported.

NanoPi NEO4 is ideal for rapid prototyping. The board can be easily integrated into final products. Great for machine vision and artificial intelligence. NanoPi NEO4 is used in industrial controllers and robots. The board is used in video surveillance systems and on advertising screens. It is an ideal choice for developers and manufacturers. NanoPi NEO4 combines high performance and compactness.

• Processor model: Rockchip RK3399
• Number of cores: big.LITTLE, 64-bit dual-core Cortex-A72 + quad-core Cortex-A53
• Frequency: Cortex-A72 up to 2.0 GHz, Cortex-A53 up to 1.5 GHz
• GPU: Mali-T864, support OpenGL ES 1.1/2.0/3.0/3.1, OpenCL, DX11 and AFBC
• VPU: 4K VP9 and 4K 10-bit H.265/H.264@60fps decoding, dual VOP and more
• RAM: 1 GB DDR3-1866
• Storage: no eMMC, but there is an eMMC connector; MicroSD x1 slot for cards up to 128 GB
• Network: Ethernet 1 Gbps, Wi-Fi 802.11 b/g/n, Bluetooth 4.0, antenna x1 with IPX connector
• Audio output: HDMI
• Video input: one 4-channel MIPI-CSI up to 13 Mp/s
• Video output: HDMI 2.0a, support 4K@60Hz, HDCP 1.4/2.2
• USB: USB 3.0 Type-A x1, USB Type-C (USB 2.0 OTG + power) x1, USB 2.0 Host x2 (one Type-A, the other 2.54 mm connector)
• Connectors: GPIO1 40-pin (M50-4302045), 2 x I2C, 1 x UART/SPI, 1 x SPDIF_TX, up to 8 x GPIO, PCIe x2, PWM x1, PowerKey; GPIO2 1.8V 8-channel I2S; GPIO3 debug UART (3 V, 1500000 bps), USB 2.0 x1
• LEDs: power (red) x1, GPIO controlled (green) x1
• Other: RTC battery (2-pin, 2.54 mm pitch), operating temperature -20 to +70 °C
• Power: DC 5V/3A
• PCB: 8 layers
• Size: 60 x 45 mm
• Weight: 30.25 g