The electronic speed controller is the power translator between flight controller and motor, and it sets the ceiling for throttle response, efficiency and reliability. This catalog section lists 303 ESCs and BEC/ESC regulators from 20 manufacturers, from lightweight 20x20mm stack ESCs for 3-inch FPV builds to high-amp BLHeli_32 and AM32 controllers for 13-inch heavy-lift and industrial multirotors.
Every listing shows live stock, multi-currency pricing and the electrical specifications procurement needs — continuous current, burst rating, input voltage, firmware protocol and mounting footprint — so a replacement ESC or a volume kitting order can be specified without cross-checking a second site.
Size the ESC with headroom over the motor’s peak amps at the propeller and cell count you fly. Continuous rating matters more than burst; derate for hot climates and enclosed stacking.
Confirm the supported LiPo/Li-ion cell range (3–6S, 6–14S HV) against the battery pack. Overspecing voltage headroom is cheap; under-specing destroys FETs.
Choose BLHeli_32, AM32 or Bluejay according to your flashing and bidirectional DShot needs, and verify DShot/ProShot compatibility with the flight controller output.
20x20mm and 30x30mm stack ESCs suit compact builds; standalone ESCs with heatsinks suit high-current X8 and coaxial airframes. Check BEC amperage for servos and payloads.
For fleet and ODM programs, order ESCs from the same production batch and request matched firmware. Bulk RFQs can specify pre-flashed firmware and connector options.
Use the motor manufacturer’s measured amp draw at your propeller and cell count, then add roughly 20–30% headroom for the ESC’s continuous rating. For fleet purchases, share the motor/propeller/cell combination in an RFQ and the engineering team will confirm the match.
Both run on most modern brushless motors and support DShot, but configuration tools and some bidirectional/features differ. Pick one firmware standard per fleet to simplify maintenance and spare-part stocking.
Yes. Every product page and the Request for Quote flow supports volume pricing, bundle and kitting requests, lead-time confirmation and export documentation. RFQ submissions are answered by a trade specialist with a written quotation in USD; there is no minimum account size to submit one.
Controlled items can be browsed, priced and added to cart like any other product. After an order is placed, every transaction runs through denied-party screening and an ECCN/dual-use classification check. Where a license or end-user certificate is required, the compliance team provides the exact documentation path instead of cancelling the order. See the Export Compliance page for the full process.
303 products
Popular models: Hobbywing SkyWalker 80A Brushless ESC ABS Plastic CE Certified 2-6S Lipo Power for RC Aircraft Multicopter Airplane Helicopter, ESC regulator Hobbywing Platinum V5 260A, ESC regulator Hobbywing QuicRun WP 10BL60 A
A drone ESC (electronic speed controller) drives the three-phase brushless motor by converting the flight controller's DShot or PWM signal into synchronized MOSFET switching. The ESC catalog holds 302 regulators, from 4-in-1 BLHeli_32 stacks sized for 3–6 S FPV builds to high-current single ESCs for agricultural, logistics and heavy-lift multirotors. Match the ESC current rating to your motor and prop, the voltage rating to your LiPo cell count, and confirm DShot generation and bidirectional telemetry support.
Brands in stock include Hobbywing, T-Motor, Flycolor, Maytech, MAD, Emax, Flipsky and Skystars, covering racing 4-in-1 boards up to 180 A HV single ESCs. Send your motor and cell spec through the RFQ for a matched ESC recommendation.