Motor choice defines thrust, efficiency and flight time. This section contains 648 brushless motors from 20 manufacturers, organized by stator size — 0802–1103 micro motors, 2207/2306 five-inch class, 28xx/31xx cinematic and long-range, and 4xxx/5xxx heavy-lift and coaxial class.
Listings carry KV rating, recommended cell count, mounting pattern, shaft and adapter standard, and measured thrust data where the manufacturer publishes it, allowing airframe designers to build a matched propulsion table rather than interpolating from marketing claims.
Stator height and width set torque and thrust headroom; match the motor class to frame size and all-up weight, not to KV alone.
Higher KV spins smaller props on lower cell counts; large props on 6S+ use lower KV. The KV/cell/prop trio must be selected together.
Verify 9x9/12x12/16x19/19x25/25x25 mounting and M3/M5 shaft plus propeller adapter format before ordering replacements.
Compare grams-per-watt at your operating throttle point; a few percent efficiency difference compounds into minutes of flight time on industrial missions.
Order CW/CCW quantities and matched winding batches for multirotor fleets; ODM RFQs can specify connectors, lead length and balanced sets.
KV must be chosen with propeller diameter and LiPo cell count: small props and 4S use higher KV; large props and 6–14S use lower KV to stay under the motor and ESC current limits. Send your frame, prop and cell setup via RFQ for a matched motor/ESC recommendation.
Both. Single units are available for replacement; fleet and ODM orders should request matched sets with consistent winding, and can specify lead length, connector and CW/CCW split.
Yes. Every product page and the Request for Quote flow supports volume pricing, bundle and kitting requests, lead-time confirmation and export documentation. RFQ submissions are answered by a trade specialist with a written quotation in USD; there is no minimum account size to submit one.
International shipping options with transit times are shown at checkout, and the landed-cost estimator displays estimated duties and taxes before payment so procurement teams can approve a fully loaded cost. Final import charges are assessed by the destination customs authority.
648 products
Popular models: Hobbywing X9 Plus Dron Motor Combo High Speed Brushless Hobbywing X9/x9 Plus Brushless Motor for Drone with wings, KingTech K-85G4 (K-86G4+) Turbine Engine, T-MOTOR AT2826 Long Shaft Brushless Motor KV900 KV1100 3-4S High Torque Outrunner Motor for RC Airplane Fixed Wing VTOL Drone