ESC regulator Maytech MT50A SBEC FP32 50A
Continuous current: 50A
USD · Volume pricing available
زمرے:
Certifications
Global Shipping 7-14 Days
DHL, FedEx, UPS, Air & Sea
Genuine Products
Authorized distribution
Export License Ready
ECCN, CO, CI, PL, EUS docs
24/7 Tech Support
Pre & post sales
Export Compliance
9A018AI confidence 100% · NLR — No license required. Standard end-use statement recommended.
Buyer Tier Benefits
Tier discounts stack with volume pricing. Automatically applied after your first order.
Order a reliable Maytech MT50A-SBEC-FP32 50A ESC regulator for your FPV drone!
Ensure stable and powerful control of your drone's motors. The Maytech MT50A-SBEC-FP32 controller is designed for mid-sized racing and freestyle drones. It supports a wide voltage range from 2S to 6S, making it a versatile solution for different configurations. The built-in switching power supply (SBEC) reliably powers the flight controller and receiver, eliminating the need for a separate BEC. BLHeli_32 firmware provides lightning-fast response and support for all modern digital protocols.
-
Supports a wide range of 2-6S LiPo input voltage for universal installation.
-
Built-in 5.5V/3A switching BEC for reliable power supply to the flight controller and peripherals.
-
Modern firmware BLHeli_32 with support for DShot 300/600/1200, Multishot and Oneshot.
-
Compact dimensions and low weight for easy integration into any design.
-
High-quality components and reliable assembly from the famous Maytech brand.
Operating principle and design
The Maytech MT50A-SBEC-FP32 governor is an electronic speed control device for brushless motors. It receives signals from the flight controller using modern digital protocols such as DShot. They provide high accuracy and noise immunity. Power MOSFET transistors with low on-channel resistance convert battery energy into three-phase current to power the motor. The built-in high-frequency switching regulator (SBEC) produces a stable 5.5 volts with a current of up to 3 amperes to power all on-board electronics.
The BLHeli_32 firmware offers advanced configuration options through special software on the computer. The pilot can adjust the braking force, the switching frequency, calibrate the throttle and activate the active cooling mode. DShot support allows telemetry data to be sent back to the flight controller, including motor speed and current consumption.
Specifications and installation
Study the detailed parameters of the Maytech MT50A-SBEC-FP32 regulator. The device can withstand continuous current up to 50 amperes and peak current up to 55-60 amperes for a short time. Input voltage from 7.4 to 25.2 volts corresponds to 2-6S batteries. The built-in BEC produces a stable 5.5 volts at up to 3 amps. The dimensions of the regulator are approximately 50x25x8 mm, weight is about 25 grams. For connection, standard 14AWG power wires and a signal cable with a connector are used.
The controller is compatible with most modern flight controllers and is ideal for drones with 2207-2306 motors. Its ease of setup and reliability make it an excellent choice for both beginners and experienced pilots. Parameters are configured through the BLHeliSuite program on a computer using a special USB programmer.
Specifications
- Continuous current: 50A
- Burst current: 70A
- BEC: 5.5V/5A
- Lipo: 2-6 cells
- Net weight: 56g
- Size: 50*31 mm.
