Charger HOTA F6+

Buy HOTA F6+ - the best choice for active FPV pilots and modelers

The Chinese brand HOTA specializes in high-end chargers and power accessories. The flagship lines are the D6+, F6, F6+ and P6 series. All devices are aimed at professionals. The brand also produces power supplies, balance boards and cables. The product is highly powerful. The range is complemented by charging stations for car service stations.

• Six independent channels for charging six batteries at once.

• Maximum total power up to 1000 W from external power supply.

• Powerful balancing current 1 A per channel.

• Four discharge modes, including recuperation up to 1000 W.

• Simple color 2.8″ IPS display and intuitive controls.

How does the HOTA F6+ charger work?

The device operates from a 220V network or an external source. Each channel operates independently. You insert the batteries into the XT60 connectors. Connect the balancing cables to the appropriate ports. The processor determines the battery type automatically. You set the current and charging mode. Microcontrollers monitor voltage and temperature. When the process completes, the power turns off. The recovery function returns energy to the source.

Specific functionality and technical characteristics

Model F6+ has 6 balancer ports for 1-6S. The number of power channels is also six. The mains power is 500 W (AC). Power from external source 1000 W (DC). The charging current of each channel reaches 15 amperes. The balancing current per channel reaches 1000 mA. The charger charges any type of battery. These are LiPo, LiHV, LiFe, Li-Ion at 1-6S. These are NiMH and NiCd at 1-16S.

These are lead-acid Pb 2-24V. Internal discharge is 12 W per channel (up to 3A). Discharge with recuperation provides up to 250 W per channel (1000 W in total). The device has two USB ports (5V/2.1A). Servo tester function is available. The firmware update port allows you to get new features.

Specifications

• Input voltage: AC 100-240V / DC 6.5-30V
• Max. power (AC): 500 W (from mains)
• Max. power (DC): 1000 W (4 x 250 W, requires external power supply >24 V)
• Charging current (per channel): 0.1 – 15 A
• Balancing current (per channel): 1000 mA (1 A)
• Supported battery types: LiPo, LiHV, LiFe, Li-Ion (1-6S); NiMH, NiCd (1-16S); lead-acid Pb (2-24V)
• Discharge mode (internal): 12 W x 4 (up to 3 A)
• Discharge mode (recuperation): 250 W x 4 (1000 W)
• Output connectors: 4 x XT60 (for batteries), 4 x balance ports (1-6S)
• DC input: XT90
• USB output: 2 x USB-A (5V / 2.1A)
• Firmware update port: yes
• Connector for testing servos: yes
• Display: 2.8″ IPS, color, 320×240 pixels
• Control: touch buttons
• Dimensions: 115 x 126 x 87 mm
• Weight: 935 g