VEYE-MIPI-IMX462 board

Choose the high-sensitivity VEYE MIPI-IMX462 board for your machine vision projects!

Get high-quality images even in low-light conditions. The VEYE MIPI-IMX462 board is based on the SONY STARVIS IMX462LQR-C sensor. This is a back-illuminated matrix with an extended red and infrared range.

The device has a resolution of 2.07 megapixels and produces an image of 1920x1080 pixels. The pixel size of 2.9 microns ensures high light sensitivity. The SNR1s value is only 0.18 lux, which allows you to shoot in the twilight. Choose a professional solution for difficult shooting conditions. Order VEYE-MIPI-IMX462 right now in our store.

• Highly sensitive SONY STARVIS sensor with excellent performance in the dark.

• Compact single board design measuring just 38x38mm for easy integration .

• Flexible power supply with automatic switching between 5V and 3.3V .

• Advanced picture settings with support for WDR, Defog and 2D/3D noise reduction.

• Easily connect to popular Raspberry Pi and Nvidia Jetson platforms via MIPI-CSI2 interface.

Operating principle and design of the camera

The VEYE board is a compact camera module for embedded systems. Light enters the sensor through an interchangeable M12 or CS mount lens. The SONY STARVIS sensor converts light into an electrical signal with a high dynamic range. The built-in ISP processor processes RAW data from the matrix. It performs auto or manual adjustment of exposure and white balance. The user can adjust brightness, contrast, sharpness and saturation.

The camera supports a rolling shutter and a wide range of shutter speeds from 1/25 to 1/50000 seconds. A long shutter speed function is available for shooting in complete darkness. To improve image quality, 2D and 3D noise reduction algorithms are used. DOL-WDR and Defog modes help you get a clear picture in fog or in bright backlight.

Technical characteristics and interfaces

Explore the detailed parameters of the VEYE-MIPI-IMX462 camera. The SONY IMX462LQR-C STARVIS sensor has an optical format of 1/2.8 inches and a diagonal of 6.46 mm. The pixel size is 2.9 × 2.9 micrometers. RAW Bayer output data format.

The board supports 1080p frame rates at 25 or 30 frames per second. MIPI CSI-2 output interface with two data lines and 1.188 Gbps bandwidth. Control is carried out via the I2C bus with a level of 3.3 V.

A 15-pin FPC connector with a pitch of 1.0 mm is used for connection. The board has connectors for controlling an IR CUT filter and an external day/night switching trigger. Board dimensions 38×38 mm, height without lens 11 mm. Operating temperature from -30 to +85°C, performance guarantee at -10…+60°C.

Applications and compatibility

The board is ideal for unmanned aerial vehicles. Its light weight and dimensions allow the module to be installed on drones of any class. High sensitivity is useful for night flights and search operations. The camera is widely used in computer vision and predictive analysis systems. Compatible with Raspberry Pi, it is popular in educational projects and hobbies.

Specifications

• SENSOR (sensor)
• Sensor: SONY IMX462LQR-C★STARVIS
• Pixels: 2.07 MP
• Resolution: 1920×1080
• Image size: 6.46 mm diagonal (1/2.8″ type)
• Pixel size: 2.9 µm (H) × 2.9 µm (V)
• Output format: RAW Bayer
• Shutter type: rolling shutter
• SNR1s value: 0.18 lx
• ISP
• Frame rate: 1080p@25 / 1080p@30 fps
• Exposure: auto or manual
• White balance: auto or manual
• Shutter speed: 1/25 (1/30) s to 1/50,000 s
• Long Shutter: Supported
• Noise reduction: 2D/3D
• Image settings: brightness, contrast, sharpness, saturation, flip, mirroring
• Image enhancement: BLC, DOL‑WDR, Defog
• Day/night mode: manual or via IR‑CUT filter with external trigger.