Stack GEPRC TAKER H743 BT 32Bit 50A

Order GEPRC TAKER H743 BT 32Bit 50A stack - get flagship performance

Are you building a high performance quadcopter? Take a look at this stack. GEPRC TAKER H743 BT 50A is a flagship solution. It combines advanced technologies. Ideal for racing drones and freestyle. You will get maximum processing power. And absolute control over the flight.

The core of the stack is the flight controller. It uses STM32H743 processor. The clock frequency reaches 480 MHz. This ensures the highest performance. You will be able to use complex filters. The smoothness of flight will be exceptional. The ICM-42688-P gyroscope is responsible for stabilization. It is highly accurate.

Four speed controllers are integrated into the stack. Each is rated for 50A continuous current. This is enough for powerful motors. Support for the DSHOT1200 protocol ensures lightning-fast response. The key feature is the built-in Bluetooth module. It allows you to configure the copter from your smartphone. You don't need a cable.

A 9V 3A stabilizer is installed on the board. It reliably powers video equipment. The built-in OSD displays data on the glasses. There is a black box for recording telemetry. The micro-SD card slot is conveniently located. The board dimensions are compact. This simplifies installation into the frame.

Main advantages of the stack

This stack is designed for the most demanding pilots. It offers incredible power and convenience. You will appreciate its reliability and speed. The device will unlock the potential of any build. Here are five key advantages of this model.

• Powerful STM32H743 processor with a frequency of 480 MHz Provides record-breaking performance for data processing and complex filters.

• 50A Stroke Controllers with DSHOT1200 support guarantee instant motor response and smooth control at high speeds.

• Built-in Bluetooth module for wireless setup allows you to change flight parameters directly from your smartphone through the application.

• 9V/3A voltage stabilizer and built-in OSD system provide clean power to video devices and telemetry output to the screen.

• Accurate gyroscope ICM-42688-P and support for current firmware provide impeccable stability and wide possibilities for customization.

Choose GEPRC TAKER H743 BT for top builds. This is a reliable basis for winning flights. Stack will prove himself in racing and freestyle.

Specifications

• High performance STM32H743 chip (Cortex-M7, 480 MHz)
• Dual gyro: MPU6000 + ICM42688-P
• Built-in 512 MB black box
• Support Bluetooth setting
• Built-in barometer, OSD with AT7456E chip
• 7 UART ports (UART3 - for Bluetooth)
• Betaflight, INAV, ArduPilot support
• 2 independent BEC: 5V 3A and 12V 2.5A
• Compatible with DJI Air Unit without soldering
• Professional 4-in-1 ESC at 50A/96kHz
• PWM frequency up to 96 kHz, telemetry and DShot600
• Fully compatible with BLHeli_32 and AM32 firmware.