Receiver FrSky TD R6
The compact and lightweight FrSky TD R6 receiver has 6 PWM channels, two 3-pin ports for SBUS and FBUS/S.Port output. By setting the S.Port to FBUS protocol, the TD receiver provides the ability to interface with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.), and will also allow you to simplify the setup of your equipment.
USD · Оптовые цены
Категории:
Сертификаты
Доставка 7-14 дней
DHL/FedEx/UPS/авиа/море
Оригинал гарантирован
Официальные поставщики
Полный пакет документов
ECCN, CO, CI, PL, EUS docs
Поддержка 24/7
До и после продажи
Экспортный контроль
5A001AI уверенность 100% · NLR — Лицензия не требуется. Рекомендуется заявление о конечном использовании.
Программа лояльности
Скидка по уровню суммируется с оптовыми ценами
Order a reliable FrSky TD R6 receiver for your quadcopter!
The FrSky TD R6 receiver combines minimal weight (1.7 g) and compact dimensions (22x15 mm), which is ideal for quadcopters. It supports 6 PWM channels for precise control of components. Two 3-pin ports provide SBUS and FBUS/S.Port output for easy integration with flight controllers.
The model uses the TD protocol for stable communication with minimal delays even over long distances. The signal remains clear in the face of interference - this is important for racing drones and filming in difficult locations. The receiver is compatible with FrSky transmitters in TD, FCC and EU LBT modes.
Easy to integrate and immune to interference
FrSky TD R6 is easy to install thanks to its compact design and fastening with double-sided tape. A clean SBUS/FBUS signal reduces the risk of data loss during high-speed maneuvers. The receiver automatically scans free frequencies, avoiding conflicts with other pilots on the track.
The built-in circularly polarized antenna ensures stable reception even when the drone turns over. The model is resistant to vibrations and temperature changes - this extends its service life in extreme flights.
The optimal choice for assembly and upgrade
The TD R6 is suitable for beginners and experienced pilots: setup takes 3 steps via the BIND button. OpenTX and EdgeTX compatibility allows the receiver to be integrated into any remote control configuration. For team racing, use the “Telemetry to master only” mode - this will eliminate interference in the group.
Upgrade older receivers to the TD R6 to get two-way communication and drone health monitoring. The kit includes soldering connectors and adapters - no need to buy additional accessories.
Universal compatibility and advanced settings
Activating the FBUS protocol via S.Port allows you to connect telemetry devices: ESC Neuron, Advance Sensors, GPS modules. You get data on battery voltage, motor temperature, speed in real time. This simplifies the diagnosis and configuration of the quadcopter without unnecessary wires.
FrSky TD R6 operates in the 4-10V range, suitable for most LiPo batteries. Built-in reverse polarity protection reduces the risk of damage due to connection errors. Easy firmware via the FrSky Config application updates the functionality in a few minutes.
Choose the TD R6 for projects where reliability, minimal weight and customization flexibility are important. The receiver is available in AEGISKY - add it to your racing, freestyle or filming drone build.
Specifications
- Frequency: 2.4 GHz and 900 MHz
- Size: 47.5 × 20.4 × 10.9 mm
- Weight: 11.5 g
- Operating voltage: 3.5 - 10 V (3.7 - 8.4 V recommended)
- Working current: ≤110mA at 5V
- Compatibility: Tandem series remote control and RF module supporting TD protocol
- Antenna connector 2.4 GHz / 900 MHz: IPEX1
- Voltage measurement range via AIN2 (external device): 0 - 30 V.
