Flight controller HGLRC SPECTER 10A AIO

Order the HGLRC SPECTER 10A flight controller - the ideal electronics for your microdrone

To create the lightest and most compact quadcopters, we present flight controller HGLRC SPECTER 10A AIO. This is a highly integrated All-In-One (AIO) board. Key control components are housed in one miniature housing. This approach minimizes the number of wires and weight. You will receive a ready-made base for a Whoop or Toothpick class micro drone. Assembly will be quick, and the design will be neat and reliable.

Flight controller HGLRC SPECTER 10A AIO is the perfect center for a tiny flying machine. It combines performance and minimalism. The board is designed to work with low-power but efficient motors. You can build a drone for indoor racing or recreational flying. This is the solution for pilots who value elegance and ease of assembly. Your mini-project will acquire a modern “brain” and power system.

Five main advantages of the device

• Full integration in AIO format. Combines a flight controller and 4-in-1 ESC in one board. This minimizes installation complexity and overall assembly weight.

• Compact size 25.5×25.5 mm. Designed specifically for tiny microdrone frames. Allows you to create the lightest and most balanced design.

• Sufficient power 10A per ESC channel. Optimal for small motors 0802-1103. Provides stable power for dynamic flight.

• Ready to install ExpressLRS. Has a dedicated connector for the popular ELRS receiver. You will receive a modern and reliable control system.

• High frequency gyroscope and F4 processor. Provides fast data processing for instant response. This is important for precise control of the micro drone.

Operating principle and technical details

AIO flight controller acts as the central nervous system of the drone. It continuously processes a huge flow of information. An external receiver (for example, ELRS) transmits the pilot's commands to him. At the same time, the built-in gyroscope monitors the angles of inclination and rotation of the device. The STM32F4 processor analyzes both data streams hundreds of times per second.

Based on this analysis, correction signals are calculated. These are sent to the built-in 4-in-1 speed controller (ESC). The ESC, in turn, controls the current for each of the four motors. This creates the required thrust and moment for flight. HGLRC SPECTER 10A AIO makes this cycle incredibly fast. The result is a smooth and compliant drone, ready for any maneuver.

Specific functionality and technical characteristics:

• Format: All-In-One (FC + 4-in-1 ESC).

• Board size: 25.5 x 25.5 mm.

• Mounting holes: 20x20 mm (compatible with micro frames).

• Flight controller processor: STM32F411.

• Gyroscope: High frequency, for example, ICM-42688-P.

• FC firmware: Betaflight (pre-installed).

• Built-in ESC: 4-in-1, 10A per channel, firmware BLHeli_S.

• Receiver Connector: Dedicated pad for connecting an ELRS receiver.

• Supply voltage: Wide input, usually 1-3S LiPo (up to 4S, check).

• Interfaces: UART, I2C for connecting additional sensors.

This controller is a great choice for entering the world of micro drones. It's ideal for building your first Whoop or compact Toothpick device.

Specifications

• MCU: STM32F411
• MPU: IXM42688
• BEC: 5 V 1.5 A
• OSD: support
• LED: support
• Buzzer: support
• UARTS: Image transmission UARTS1 OSD Adjustment parameters/protocol receiver UARTS2
• CRSF/VTX HD
• Built-in receiver: SPI ExpressLRS 2.4G.
• Built-in receiver frequency: 2.4 GHz
• Built-in image transmission: 25-REC-100-400mW (adjustable)
• Built-in image transmission frequency: 48-5.8 GHz.
• Constant current: 10A
• Peak current: 13A (10s)
• ESC Protocol: Dshot600, Oneshot, Multishot
• Flight Control Firmware: HGLRCF411SX1280 V2
• ESC Firmware: Z-H-30 (Bluejay)
• Input voltage: 1-2S 3.7V-7.4V (Lipo)
• Size: 32x32 mm
• Mounting hole: 25.5X25.5mm.M2.
• Weight: 4.9 g.