Антенна Ubiquiti NanoBeam 2AC-13

Order the powerful Ubiquiti NanoBeam 2AC-13 radio bridge for your drone ground station.

Ensure reliable communication with your drone at extreme distances. The Ubiquiti NanoBeam 2AC-13 is a high-performance wireless communications device that is ideal for ground-based FPV flights. Operating in the 2.4 GHz band with a gain of 13 dBi, the radio bridge is capable of transmitting data over a distance of up to 15 km or more while maintaining line of sight.

Thanks to the proprietary airMAX AC protocol with TDMA technology, you will get a stable connection with minimal delays even in very noisy air conditions. Choose reliable equipment for professional tasks. Order Ubiquiti NanoBeam 2AC-13 now from our store.

• Huge communication range of up to 15 km for confident control of the drone over long distances.

• High throughput up to 450 Mbps for transmitting telemetry and high-definition video.

• The narrow radiation pattern (about 30 degrees) effectively filters noise and interference from the side.

• All-weather design with operating temperatures from -40 to +70°C for operation in any climatic conditions.

• Convenient setup via built-in Wi-Fi for control and the UNMS app on your smartphone.

Operating principle and key technologies

The Ubiquiti NanoBeam 2AC-13 works as a wireless bridge, connecting your ground station to a remote site or acting as a subscriber device to connect to a base station. Its operation is based on the revolutionary airMAX AC technology, which uses the TDMA (Time Division Multiple Access) protocol. Unlike conventional Wi-Fi, this protocol allocates strictly defined time slots for data transmission to each client, which completely eliminates collisions and hidden interference, maximizing the efficiency of airtime use.

The antenna's narrow beam pattern with 13 dBi gain allows radio energy to be focused in the desired direction, blocking noise and extraneous signals from lateral directions. This is especially important in areas saturated with other RF signals. The powerful 533 MHz Atheros MIPS 74Kc processor and 64 MB of RAM ensure fast packet processing and stable operation of the airOS operating system even under maximum loads.

Specifications and customization options

For ease of setup, a separate Wi-Fi module is built into the device. You can connect to it from a smartphone or tablet via the UNMS app and get to the airOS configuration interface without having to lug a cable to the access point. The built-in airView spectrum analyzer allows you to scan the airwaves and select the least noisy frequencies to work with, which is critical in field conditions with a lot of noise.

Applications for FPV and Drones

Ubiquiti NanoBeam 2AC-13 will be an ideal solution for organizing a remote ground control station. You can mount it on a tripod or mast and direct a narrow beam towards the flight path, providing a reliable channel for transmitting control commands and receiving telemetry. The device is also great for creating a video bridge, which can be used to broadcast images from racing drones or FPV aircraft over long distances.

Main Features

• Dimensions (with mount): 189 × 189 × 125 mm
• Weight (with mount): 530 g
• Power: 24 V, 0.5 A Gigabit PoE adapter (included)
• Maximum power consumption: 8.5 W
• Antenna gain: 19 dBi
• Interfaces and electronics:
• Network interface: 1 port 10/100/1000 Ethernet, Wi‑Fi for management
• Processor: Atheros MIPS 74Kc, 720 MHz
• Memory: 128 MB DDR2, 8 MB Flash
• Indicators: power, Ethernet, signal level
• Operating frequency range (worldwide): 5150–5875 MHz
• Channel sizes: 10/20/30/40/50/60/80 MHz.