
FPV drone Happymodel Moblite7
One of the lightest 75mm drones on the market is the Happymodel Moblite7. Equipped with a RunCam Nano3 camera, built-in SPI Frsky D8 receiver, DiamondF4 FR flight controller, 5A BLheli_S 4-in-1 ESC and 5.8 GHz video transmitter.
USD · Volume pricing available
Kategorie:
Certifications
Global Shipping 7-14 Days
DHL, FedEx, UPS, Air & Sea
Genuine Products
Authorized distribution
Export License Ready
ECCN, CO, CI, PL, EUS docs
24/7 Tech Support
Pre & post sales
Export Compliance
9A012AI confidence 100% · NLR — No license required. Standard end-use statement recommended.
Buyer Tier Benefits
Tier discounts stack with volume pricing. Automatically applied after your first order.
FPV-drone Happymodel Moblite7 with delivery throughout the Russian Federation
This drone is one of the lightest among models with a 75 mm frame. It offers users unique performance in a miniature form factor. The HappymodelMoblite7 FPV drone is ideal for both beginners and experienced pilots who want a new experience when flying an unmanned aerial vehicle. It will be a real boon thanks to its thoughtful design, modern technology and versatility in use.
Design features of the model
One of the key features of the Happymodel Moblite7 is its size and weight. It has a frame size of 75 mm and weighs about 70 grams. This is especially important for FPV pilots who often fly in tight spaces. Despite its miniature size, the drone is equipped with powerful motors that allow it to develop decent speeds and make sharp maneuvers. Happymodel Moblite7 has a durable and lightweight frame made of high quality plastic. This makes it resistant to damage.
The drone's design is carefully thought out to minimize weight and maximize strength. Properly placed elements provide good alignment and balance, which has a positive effect on control and flight stability.
The drone has special propeller protection, which is designed to ensure the safety of the device in the event of unexpected falls or collisions. The reinforced frame allows the installation of a more powerful battery. Thanks to this, you can get a flight time of up to 10 minutes.
Ease of use
Happymodel Moblite7 is easy to use. The drone typically comes ready to fly, allowing owners to take to the skies straight away without wasting time on assembly. In addition, the drone is compatible with various components and accessories. This makes it easy to upgrade it as needed.
Specifications
- Original name: Happymodel Moblite7 ultra light 1S 75mm brushless whoop;
- Frame size: 75 mm;
- Drone size: 97 × 97 × 25 mm;
- Weight: 19.5 g (without battery);
- Receiver: SPI Frsky;
- Maximum take-off weight: 55 g;
- Recommended batteries: 1S 450/550/650mAh (not included)
Motors:
- Model: EX0802 19000KV;
- Configuration: 9N12P;
- Stator diameter: 8mm;
- Stator length: 2 mm;
- Shaft diameter: 1mm;
- Motor size (diameter × length): 10.5 × 14.9 mm;
- Weight: 1.7 g;
- Power (LiPo): 1S only
Flight controller
- Model: DiamondF4 FR FC;
- Target: CrazybeeF4FR;
- Microcontroller: STM32F411CEU6 (100 MHz, 512 KB flash memory);
- Gyroscope: MPU6000;
- Power supply: 1S battery input (2.9 - 4.35V DC);
- Built-in 4-in-1 speed controller: 5A (each) Blheli_S 4in1 ESC Dshot600;
- Built-in Betaflight OSD menu (SPI control);
- Built-in video transmitter 5.8 GHz: 25 - 200 mW;
- Built-in Frsky receiver;
- Built-in BEC 5V 1A
Built-in speed controller:
- Power supply: 1S LiPo/LiPo HV (LiHV)Current:;
- 5A continuous;
- peak 6A (3 seconds);
- BLHeliSuite support;
- Factory firmware version: O_H_5_REV16_8.HEX;
- Default protocol: DSHOT600
Built-in 5.8 GHz video transmitter:
- Output power: 25 mW - 200 mW (switchable);
- Channels: 40 channels;
- Input voltage: 3.3V/5.5V;
- Current consumption: 300 mA;
- Smartaudio support
RunCam Nano3 camera:
- Matrix: 1/3″ CMOS;
- Horizontal resolution: 800 TVL;
- Lens: 2.3 mm (M6.5), viewing angle 140°;
- System: NTSC;
- Signal to noise ratio: >50 dB;
- Electronic shutter speed: Auto;
- Automatic Gain Control (AGC): Auto;
- Min. Illumination: 0.01 lux at 1.2F;
- D-WDR: Auto;
- Day/Night: Color;
- Power: 3 - 5.5 VDC;
- Current:
- 110 mA at 5 V;
- 120 mA at 3.3 V;
- Case material: ABS plastic;
- Net weight: 1.2g;
- Dimensions: 14 × 14 × 9 mm
LiPo battery
- Capacity: 650 mAh;
- Voltage: 3.8V;
- Continuous discharge rate: 30C;
- Size: 60 × 18 × 8 mm;
- Weight: 16 g;
- Connector: PH2.0.
Key areas of application of the model
Happymodel Moblite7 is ideal for various types of FPV activities. One of the main areas of application is racing. The compact size and high speed allow the pilot to maneuver even in confined spaces, which greatly enhances the racing fun. In addition, Moblite7 is ideal for freestyle. Its powerful engines and high maneuverability allow it to perform various acrobatic stunts.
Thus, the Happymodel Moblite7 FPV drone is a great combination of performance, compactness and versatility. It is suitable for pilots of all levels - from beginners just starting to explore the world of FPV to experienced racers looking for a reliable and powerful drone to perform challenging stunts.







