XingkaiTech Airborne Mimo mesh Radio Repeater XK-F355

Order the XingkaiTech Airborne Mimo Mesh Radio XK-F355 repeater for reliable tactical communications in any conditions!

XingkaiTech Airborne Mimo Mesh Radio Repeater XK-F355 is a professional mobile broadband communication system. The model was created for organizing secure networks in conditions where there is no line of sight. It is ideal for missions on difficult terrain, in the city and on the water. With this device, your connection will become stable and secure.

• Full IP access for voice, data and HD video.
• Self-organizing mesh network with automatic recovery in case of failures.
• Ultra-low latency of up to 10ms for real-time control.
• Data transfer rates up to 180 Mbit/s at 40 MHz bandwidth.
• Reliable AES128/256 encryption for complete protection of transmitted information.

Professional system for secure communication without a central hub

The XingkaiTech XK-F355 repeater operates in an ultra-wide frequency range from 350 MHz to 3.8 GHz with the ability to customize for specific needs. The device uses MN-MIMO architecture and spatial multiplexing technology. RF output power is 2×2 W.

Receiver sensitivity reaches -103 dBm at 5 MHz bandwidth. The communication range per jump is from 10 to 30 km in line of sight conditions and up to 3 km in urban areas. The dimensions of the device are 110x62x20 mm, and the weight is about 160 grams. The repeater operates at temperatures from -40 to +80 °C.

A special feature of the model is that it supports any network topologies. These are point-to-point, point-to-multipoint, chain relay and hybrid dynamic topology. Each network node can move arbitrarily and quickly without losing connection. The system supports automatic relay and multi-hop signal transmission. Built-in GPS and multicast support make it easy to coordinate group missions.

Choose equipment from the leader in mesh networking

The manufacturer of XingkaiTech is the Chinese company Shenzhen Xingkai Technology Co., Ltd. The brand specializes in the development of professional communication systems for government and commercial purposes.. XingkaiTech products are used in law enforcement agencies, transport and emergency services. All devices undergo strict quality control and are certified to operate in difficult conditions.

A feature of XingkaiTech equipment is its adaptability and scalability. Model XK-F355 supports DES and AES128/256 protocols for data encryption. The system is fully IP compatible and can be integrated into existing infrastructure. The device offers flexible bandwidth settings: 2.5, 5, 10, 20 or 40 MHz. Thanks to FHSS frequency hopping technology, the system is resistant to interference and signal interception.

Technical Parameters

• Signal technology: Mobile network MIMO (MN-MIMO)
• MIMO technology: spatial multiplexing, space-time coding, diversity, TX/RX beamforming
• Receive sensitivity: -103 dBm at 5 MHz bandwidth
• Channel bandwidth: 2.5, 5, 10, 20 MHz, 40 MHz optional
• Data Rate: 1-100 Mbps (at 20 MHz), 180 Mbps (at 40 MHz), Adaptive, QoS
• Modulation mode: TD-COFDM, BPSK/QPSK/16QAM/64QAM/256QAM adaptive
• RF output power: 2W × 2 (portable, airborne, modular)
• Communication distance per jump: 10–30 km (line of sight), 1–3 km (urban areas)
• Mode: Point to Point, Point to Multipoint, Multipoint to Multipoint, Auto Relay, Star, Line, Network, Hybrid
• Latency per hop: average 10 ms (at 20 MHz bandwidth)
• Encryption: DES, AES128/256, chip/TF card encryption customized
• Frequency bands: UHF 350-700 MHz, L-band 1000-1500 MHz, international mobile bands 336-344, 512-582, 566-626, 606-678, 1420-1520, 1430-1444 MHz, S-band 1800–2500 MHz, lower C-band 4400–5000 MHz, upper C-band 5100–6000 MHz

Additional data

• Operating temperature: -40 to +80 °C
• Protection degree: IP66, IP67/IP68 upon request
• Size and weight: 1.7 × 6.2 × 3.2 cm / 0.279 kg, 14 × 6.8 × 3.8 cm / 0.475 kg
• Installation and Color: 4 Mounting Holes, Black, Iron Gray, Army Green optional
• Supply voltage: 9–24 VDC
• Power consumption: operating mode 1–2 A, standby mode 0.4–0.6 A at 12 V
• Power selection: from the main cable
• Basic interface: RF 2×TNC, 1–2×RJ45 Ethernet 10/100BaseT, WiFi AP, 1×RS232-485-422-USB-Bluetooth (1.2–230.4 Kbps), DC input
• Push-to-talk and auxiliary interface: microphone, SP, PTT, GND, 1×RS485, 1×USB2.0 OTG
• Network expansion (optional): public network routing, 4G LTE, WB-NB integration, fiber optic, satellite
• Video extension (optional): Low Latency HDMI/SDI/CVBS, 4K, 2K, 1080P, 720P, D1
• Management interface: Web/GUI, API/SNMP for development
• OEM: size 10.1 × 5.4 × 1.9 cm, weight 123.5 g, RF – SMP