BeastFPV NSU video repeater
The video repeater is compatible with transmitters and receivers from most manufacturers, there are no restrictions.
USD · Volume pricing available
Categories:
Certifications
Global Shipping 7-14 Days
DHL, FedEx, UPS, Air & Sea
Genuine Products
Authorized distribution
Export License Ready
ECCN, CO, CI, PL, EUS docs
24/7 Tech Support
Pre & post sales
Export Compliance
5A001AI confidence 100% · NLR — No license required. Standard end-use statement recommended.
Buyer Tier Benefits
Tier discounts stack with volume pricing. Automatically applied after your first order.
Order a universal video bridge - BeastFPV NSU video repeater!
-
Two operating modes: wired (Ethernet) up to 300 m and wireless repeater.
-
Supports all popular video frequencies 1.2/3.3/4.9/5.8 GHz without restrictions.
-
STM32 microcontroller for reliable and fast signal processing.
-
Duplicate cables and pads for soldering in case of incompatibility.
-
Universal power supply 4S–6S LiPo (14.8–25.2 V) via XT60 connector.
-
Microcontroller: STM32
-
Interfaces: XT60 (power), UART (serial communication), JR slot (radio control), RJ45 (Ethernet)
-
Supported protocols: ELRS, TBS Crossfire
-
Transmitter Connector: Micro
-
Maximum power: Unlimited
-
Reverse telemetry: Supported.
Technical excellence and two operating modes
The BeastFPV NSU video repeater is built on the STM32 microcontroller. The device supports two completely independent operating modes. In wired mode, you connect the repeater to the remote control or glasses via an RJ45 cable. The transmission range of video signals over twisted pair Ethernet exceeds 300 meters. You can place the repeater at a high altitude or distance from the operator.
In wireless mode, the device operates as a classic video signal repeater. You install any compatible video receiver into the Micro slot. The signal is received, amplified and retransmitted to your FPV goggles. The drone's flight range increases significantly without losing image quality.
Universal compatibility and power
The repeater has no restrictions on compatibility with equipment. It works with transmitters and receivers of any manufacturer and frequency. Bands supported are 1.2 GHz, 3.3 GHz, 4.9 GHz, 5.8 GHz and others. The video receiver interface is made in the FatShark / AV standard. The CVBS analog output signal is displayed on any monitor or glasses.
Engineers have provided protection against loop incompatibility. All connections are duplicated by contact pads on the board. You can solder the wires directly if necessary. Power is supplied from the on-board 4S–6S LiPo battery via the XT60 connector. Input voltage range from 14.8 to 25.2 Volts.
Control protocols and telemetry
The repeater supports all modern control protocols. These include ExpressLRS and TBS Crossfire for a backup communication channel. Reverse telemetry works fully without additional settings. The device can be used as a remote control via Ethernet for 300 meters. It is the ideal tool for complex industrial and search missions.
Design and reliability
The repeater's compact housing protects the electronics from vibrations and shocks. All connectors have reinforced fastening to the board. The design is designed for repeated replacement of receiving modules. The Micro slot is compatible with transmitters of various brands and frequencies.
