LiDAR provides direct range measurement for terrain and corridor mapping, obstacle avoidance and autonomous navigation. This section contains 112 LiDAR units from 20 brands, ranging from low-cost single-line and solid-state modules for robotics and collision avoidance to survey-grade multi-line and integrated mapping payloads with GNSS/INS for georeferenced point clouds.
Listings distinguish navigation sensors (real-time obstacle detection, ROS drivers) from mapping payloads (centimeter-class georeferencing, IMU integration), so surveying contractors and robotics engineers can select against the correct accuracy, range and point-rate requirements.
Mapping LiDAR needs survey-grade GNSS/INS and high point rates; navigation LiDAR prioritizes real-time rate, field of view and ROS/driver support. Do not pay survey-grade prices for collision avoidance.
Match range to operating altitude and terrain reflectivity; verify accuracy and precision against your deliverable contour interval or point-density spec.
More channels and higher point rates improve canopy penetration and corridor mapping; single-line units suit indoor robotics and basic avoidance.
Aerial mapping requires a tightly coupled IMU and RTK/PPK GNSS; total solution weight and power must fit the airframe’s payload margin.
Confirm output format and compatibility with your point-cloud and DEM workflow (LAS/LAZ, PPK processing), and budget processing software and calibration.
A mapping payload pairs a multi-line or high-rate LiDAR with survey-grade GNSS/INS (RTK/PPK) and is sized by required point density and accuracy at your flight altitude. Submit mission altitude, required contour interval and airframe via RFQ for a matched payload recommendation.
Yes — lower-weight single-line and solid-state units with documented ROS drivers are intended for navigation and obstacle avoidance on ground robots and autonomous platforms; the robotics and SBC sections provide companion hardware.
Integration RFQs can cover payload mounting, GNSS/INS configuration and processing-pipeline guidance. Sensor and software documentation is provided with shipment.
Controlled items can be browsed, priced and added to cart like any other product. After an order is placed, every transaction runs through denied-party screening and an ECCN/dual-use classification check. Where a license or end-user certificate is required, the compliance team provides the exact documentation path instead of cancelling the order. See the Export Compliance page for the full process.
112 products
Popular models: Lidar Livox Mid 360, Unitree L2 lidar, Lidar RPLIDAR Gravity 64×8 Matrix DTOF
The LiDAR category on www.aegisky.com lists laser distance sensors and scanning LiDARs for robot navigation, autonomous vehicles, drone altimetry and terrain following, surveying and mapping, industrial safety and research and development. The range runs from compact single-point time-of-flight rangefinders and 360-degree 2D scanning LiDAR for education and makers, to multi-channel 3D and survey-grade sensors for professional mapping and autonomous systems.
Benewake TFmini Plus, TFmini-S, TF-Luna, TF02 and TF03 (to 180 m), the Lightware SF and LW20 series and FDROBOT TOF modules provide compact, lightweight altitude and obstacle sensing over UART, CAN or I2C for drones and small robots.
360-degree scanning LiDARs from RPLIDAR (Slamtec), YDLIDAR, FDROBOT (LD14P, LD500 and Pacecat), Akusense, Siminics, SDKELI and LDROBOT deliver 2D occupancy and SLAM data for AMR and AGV navigation, obstacle avoidance and area monitoring, with USB or Ethernet interfaces and ROS drivers.
Higher-grade sensors include Livox, RoboSense, Hesai, Velodyne, Ouster, SICK, Seyond and FaseLase 3D LiDARs, the Intel RealSense L515, and airborne mapping payloads such as the DJI Zenmuse L2 and L3 and the AlphaAir 450 aerial laser scanner, suited to mobile mapping, digital twins, autonomous-driving research and UAV survey.
Contact the sensing team on www.aegisky.com for help matching range, field of view and interface to the application.