SKYRC PROGBOX programmer

Order the SKYRC PROGBOX universal programmer for professional setup of your RC equipment!

Get six essential tools in one compact device. SKYRC PROGBOX is an intelligent multifunctional programmer controlled by a high-performance microprocessor. The device allows you to fine-tune SkyRC speed controllers right in the field, without the need to connect to a computer. The compact body with a convenient LCD screen and intuitive keys makes operation as simple and efficient as possible. Choose the best for your hobby. Order SKYRC PROGBOX right now in our store.

• Six functions in one device: ESC setting, servo testing, KV motor measurement, LiPo monitoring, PPM signal analysis and PC connection.

• Portable: Compact dimensions (85x48.5x11.8 mm) and weight of only 40 g for use in any conditions.

• Intuitive controls: Four front panel keys and two-line LCD display for easy menu navigation .

• Wide testing functionality: testing LiPo batteries up to 6S with display of the voltage of each bank and potential difference.

• Servo tester modes: Automatic (Swing) and manual modes to test the stroke and peak current of servos .

Operating principle and key functions of the device

SKYRC PROGBOX works as a multifunctional diagnostic station for all your RC equipment. Basic mode ESC Setting allows you to program SkyRC speed controllers without a computer. You simply connect the device to the ESC and all settings are displayed on the screen where they can be easily changed using the navigation keys.

Mode Motor KV/RPM Tester Designed to measure RPMs per volt and RPM of touch motors . Just connect the engine to the programmer and give the gas - you will see accurate KV, RPM and input voltage readings. Mode Servo Tester allows you to check the operation of servos without turning on the transmitter, displaying voltage, position and peak current . You can choose automatic (oscillating) or manual control mode.

Technical specifications and additional features

• LiPo Battery Monitor Mode: Allows you to check the total voltage, number of cells (up to 6S), voltage of each cell, maximum and minimum values, and delta voltages .

• PPM Signal Monitor Mode: Used to check the receiver output voltage, PPM signal width and frequency.

• PC Interface (SkyLINK): The device works as a USB adapter for connecting the regulator to a computer, which allows you to update the firmware and perform detailed settings via SkyLINK software.

Technical Parameters:

• Input voltage (ESC setting): 6-10V

• Input current (ESC setting): 500mA

• No-load current: less than 20mA

• Operating temperature: 0-40°C

• Dimensions: 85 x 48.5 x 11.8 mm

• Weight: 40 g

• Protection class: IP20

Functions

1. Setting up ESC.
2. Lipo battery monitor.
3. PPM input signal monitor.
4. Servo tester.
5. KV/RPM motor tester.
6. PC interface.
7. Product size: 85x43x9mm
8. Weight: 36.5 g