Servo drive Feetech SCS0009

Order the Feetech SCS0009 servo drive for miniature precision for your projects!

Servo drive Feetech SCS0009 is an ultra-compact digital servo drive for micro-drones. It provides precise control of small mechanisms on board. This drive is ideal for projects with weight and size restrictions. You'll get reliable performance in the most compact packages. This is the optimal choice for micro-mechanisms and additional functions.

Key advantages of the device:

• Ultra-compact size and minimal weight.

• Digital control for high positioning accuracy.

• Sufficient torque of 1.8 kg/cm for micro mechanisms.

• High response speed - 0.12 sec/60°.

• Low power consumption and operating voltage 4.8-6.0V.

This servo drive will become indispensable where every gram counts. It will provide easy and precise movement in tight spaces. You can add functionality to even the smallest drone. Leave micro-management to a professional miniature device.

Operating principle and technical characteristics

The servo drive receives a digital PWM signal from the control controller. The microprocessor analyzes the width of the incoming pulse. It determines the target angle for turning the output shaft. A miniature motor drives the system through a microreducer. A built-in sensor provides position feedback.

The torque of 1.8 kg/cm is optimal for light tasks. It allows you to control small dampers, flags or switches. For example, for mechanically blocking a camera or releasing a micro-load. You will be assured of sufficient drive force.

The rotation speed of 0.12 seconds per 60 degrees is very good for a micro servo. This ensures a fast and precise response to control commands. Your mini-mechanisms will work dynamically and without delay. This is important for systems where efficiency is required.

The supply voltage is 4.8-6.0V, which is the standard for micro-systems. It can be powered from a BEC flight controller or a 5V stabilizer. The device consumes minimal current in operating and hold mode. This is critical for devices with tiny batteries.

The weight and dimensions of the drive are truly minimal. It will easily fit into the limited space of a micro drone frame. At the same time, the design retains all the features of a high-quality servo drive. You won't sacrifice reliability for compactness.

Reliability and scope of application

The miniature metal gearbox provides sufficient strength. It can withstand loads commensurate with the size and purpose of the drive. The structure is protected from distortion and jamming when installed correctly. This guarantees stable operation throughout its entire service life.

The scope of application is limited only by your imagination and size. Micro damper control for cooling components. Drive for rotating a miniature camera or laser pointer. Mechanism for releasing the lightest load or releasing the antenna.

The servo housing is quite durable for its size. However, it does not have serious protection against moisture and dust. Careful installation in a protected area of ​​the frame is recommended. Light heat shrink can be used if necessary.

The servo drive is compatible with standard control systems. It connects to any channel of the receiver or controller. Supports standard digital and analog signals. You can easily integrate it into the electronic circuit of your project.

Specifications

• Operating voltage: 4.8V 6V
• No-load speed: 0.125 seconds/60°(80rpm) 0.1 seconds/60°(100rpm)
• Operating current (no load): 120mA, 150mA
• Release torque (when locked): 1.89 kg.cm 2.3 kg.cm.
• 26.3 oz. in 31.99 oz. in.
• Stop current (when blocked): 0.8A 1.0A
• Idle current (when stopped): 6 mA, 6 mA
• Rated current: 300mA 400mA
• Terminal resistance: 0.6 ohm
• Size: 23.2mmX12.1mmX25.25mm
• Weight: 13.2 ± 1 g.