Motor Maytech 6365 200KV

Choose Maytech 6365 200KV motor for heavy duty quadcopters and powerful thrust!

The Maytech 6365 200KV motor is a high-performance brushless motor for the most demanding aircraft platforms. It is designed to operate large propellers at high voltages. This engine provides exceptional torque and efficiency. It will be an ideal choice for heavy cargo, survey and industrial drones.

• Maximum torque for lifting heavy payloads.

• Highest performance at low rpm for long flights.

• Very low KV rating for handling large screws and high voltage.

• Super reliable design with high quality bearings and reinforced shaft.

• Optimal cooling and protection against overheating during continuous operation.

The essence of the work and the principle of creating traction

The motor converts electrical energy into mechanical rotation. The three-phase current from the regulator creates a rotating magnetic field. This field acts on the powerful permanent magnets of the rotor. The rotor rotates, transmitting force through the shaft to the propeller. Low KV allows you to develop high torque at low speeds.

Specific characteristics of the model 

The 6365 marking indicates the stator size. Its diameter is 63 mm and its height is 65 mm. This is one of the largest formats for quadcopter motors. Nominal voltage to operate 12S to 14S LiPo batteries. This range is from 44.4V to 51.8V.

The key parameter is the KV rating of 200 rpm per volt. This is a very low value. It shows high power and torque on the shaft. The engine produces over 8-10 kg of thrust with one suitable propeller. Its power can exceed 2000 W at peak.

The engine design is designed to withstand heavy loads. The stator is made of high quality steel plates. The rotor with N52 neodymium magnets has a reinforced fit. The shaft is made of large diameter hardened steel. Top class Japanese bearings are used.

The engine is compatible with huge propellers. Recommended size is 20 to 24 inches in diameter. For example, 22x10, 24x8 or similar propellers. This combination creates enormous thrust with moderate current consumption.

Application and recommendations for use

This motor is designed for heavy duty professional drones. It is ideal for platforms like Tarot 650, X8 and other large frames. Its power is enough to lift full-frame DSLR cameras and stabilizers. You will get a smooth and stable flight.

The second area of application is cargo and research drones. The engine allows you to carry additional equipment. For example, sensors, air samples or delivery systems. Its reliability is critical for such missions.

The engine requires appropriate speed controllers. Requires 80-100A ESC with high voltage support. It is recommended to use controllers with DShot protocol or similar. This will ensure smooth control and protection.

Specifics and device 

Power requires powerful 12S-14S batteries with high current output. The capacity is usually from 10,000 mAh to 20,000 mAh. All connections must be made efficiently. Use wires of sufficient size and reliable connectors.

You can buy the Maytech 6365 200KV motor from the AEGISKY store. We offer original products for your projects. Our engineers will help you select compatible components. You will receive a powerful and reliable engine with a guarantee.

Correct installation is essential for safety. Mount the engine securely to the frame with all bolts. Use the locking clamp to secure the propeller. Check alignment and vibration at idle.

Regular maintenance will extend the service life. Check the condition of the bearings and the tightness of all fasteners. Clean the engine from dust and dirt after flights. Monitor the engine temperature during operation. Avoid overload.

Choose proven solutions for serious problems. The Maytech 6365 200KV motor delivers power you can trust. It will make your heavy drone stable and efficient. Trust the quality chosen by professionals.

Specifications 

• KV: 200KV
• Input Voltage: 2–12S LiPo
• No-load current: 0.8A
• Rated current: 60A
• Maximum current: 65A
• Maximum output power: 3520W
• Maximum thrust: 9700 g
• Shaft diameter: 8mm
• Output shaft length: 26mm
• Resistance: 0.0402
• Hall sensor: yes
• Engine weight: 745 g.