Flight controller DarwinFPV ELRS2.0 F411 15A Bluejay AIO

Order DarwinFPV flight controller F411 15A ELRS 2.0 AIO Bluejay - all in one for micro drones

The DarwinFPV F411 15A ELRS flight controller is a complete solution. It is designed for Whoop and Toothpick micro-drones. The board integrates all key components of the system. You will receive a ready-made base for assembly. In one compact and lightweight package.

The model runs on 1S and 2S type batteries. This is ideal for small and safe drones. You can fly at home and indoors. No risk of damage from high voltage.

The system is based on the STM32F411 processor. It provides stable operation and good performance. You will get smooth drone response to commands. And confident control in flight.

5 main advantages of the model

The DarwinFPV controller has key advantages. It is designed for simplicity and efficiency. Here are the main advantages of this model.

• Full integration of all components in one board. You don't need external regulators or a receiver. This simplifies assembly and reduces weight.

• Built-in ExpressLRS 2.4Hz receiver with antenna. It provides reliable communication with low latency. Without purchasing additional modules.

• 15A speed controllers with Bluejay firmware. They ensure smooth and quiet operation of the engines. You will get excellent responsiveness.

• Powerful F411 processor for stable operation. It supports modern versions of Betaflight firmware. You will receive all the latest features.

• Compact size and compatible with 1-2S. The board will fit into the smallest frames. Provides stable power to systems.

Ideal for compact builds

This controller greatly simplifies the assembly process. You only need to connect the motors, camera and antenna. All other components are already installed on the board. You'll have your drone flying in no time.

The model is perfect for novice pilots. Low voltage 1-2S is safe for teaching. You can learn to fly without unnecessary risks. And enjoy the stable behavior of the device.

The built-in ELRS receiver has a good range. You can fly indoors or outdoors. No signal loss or interference. This gives you freedom to maneuver.

Bluejay firmware on ESCs has been optimized. It provides a smooth start and low engine noise. You will get a more pleasant flying experience. And increase battery life.

Flight controller

• Microcontroller: STM32F411CEU6 (100 MHz)
• Gyroscope + accelerometer: ICM-20689 (SPI)
• On Screen Display (OSD): Betaflight AT7456E OSD
• Radio transmitter: SX1280 (2.4 GHz)
• BEC output: 5V 2A / 3.3V 0.2A
• Target: betaflight_4.3.0_BETAFPVF4SX1280
• 2 × UART ports
• 1 × SBus (inverter RX1)
• 1 × Softserial port (optional)
• 1 × Solder pad for external USB port
• 1 × Current sensor
• 1 × Buzzer output
• 1 × Output for RGB strip

Speed controller

• Microcontroller: EFM8BB21F16G
• Input voltage: 1-3S LiPo
• Continuous current: 15A
• Peak current (5 seconds): 17A
• Target: Bluejay_S_H_50_48_v0.14
• Size: 37 × 36 × 10.8 mm
• Installation hole: 25.5×25.5mm (M2)
• Weight: 5.0 g.