ESC regulator XXD 30A 2-4S

Buy a reliable ESC controller XXD 30A 2-4S for your first model!

Start your journey into the world of aircraft modeling with a proven and affordable solution. The ESC controller XXD 30A 2-4S is a classic choice for novice and amateur pilots. It provides confident brushless motor control on airplanes, helicopters and light drones. The device can withstand 30 amps of continuous current and up to 40 amps of peak current for 10 seconds .

The regulator works with 2-4S LiPo batteries, as well as NiMH batteries. This is the perfect component for your first project without breaking the bank . Choose simplicity and functionality from the XXD brand. Order your regulator right now in our store.

• The optimal power is 30A constant and 40A peak current for most amateur models.

• Built-in 5V/2A BEC to power receiver and servos without a separate battery.

• Support wide input voltage range 2-4S LiPo or 5-12 NiMH .

• Safe start feature to prevent accidental starting of the motor when power is applied.

• Lots of programmable features for flexible customization to suit any piloting style.

Operating principle and technical characteristics

The ESC controller converts control signals into power for the motor. It receives the signal from the receiver or flight controller. The microprocessor decodes it and determines the required power. Power switches generate three-phase alternating current for the motor windings. By changing the current parameters, the controller smoothly regulates the rotation speed.

Study the detailed parameters of the XXD 30A regulator. The DC current rating is 30 amps. Peak current reaches 40 amps within 10 seconds . Input voltage 2 to 4 LiPo or 5 to 12 NiMH/NiCd cells. The built-in BEC provides a stable 5 volts with up to 2 amps (3A peak) current. The dimensions of the device are approximately 43x25x8 mm. The regulator weighs 27 grams.

Functionality and settings of the controller

The controller offers extensive programming possibilities. You can set the battery type (LiPo or NiMH) and brake operating mode. Three startup modes are available: normal, soft and ultra soft. A normal start of 0.2 seconds is suitable for airplanes, and a soft start for helicopters. Low voltage protection thresholds for LiPo are configurable to 2.6V, 2.85V or 3.1V per can.

Built-in protections ensure safe operation. There is protection against overheating; if 110 degrees is exceeded, the regulator turns off. Implemented signal loss protection, which reduces power after 1 second. The safe start function will prevent the engine from starting if the throttle position is incorrect. It is recommended to calibrate the gas range for precise control before first use.

Specifications

• Operating current: 30A (constant), 40A (10 sec peak)
• Battery support: 2-4S Lipo (4S without BEC), 5-12 NiMH/NiCd
• BEC: 2A (constant), 3A (peak)
• Dimensions and weight: 43x25x8 mm, 27 g.