Boscam TS351 transmitter

Order the Boscam TS351 transmitter - a stable video signal for your flights!

Provide your drone with reliable communication with the ground. The Boscam TS351 transmitter has been tested by thousands of pilots. It provides clear video without delay. This is the basis of any analog FPV kit. Your flights will be safe and confident.

The main advantages of the transmitter 

• Compact and lightweight housing for easy installation.

• Power 200 mW for a stable signal over a distance.

• Supports 32 channels in the 5.8 GHz band.

• Easy to set up and connect with just three wires.

• Reliable operation without overheating thanks to the radiator housing.

These benefits make it ideal for beginners. Light weight will not weigh down your quadcopter. 200 mW of power is enough for most flights. 32 channels will help you find a free frequency. Easy connection allows you to quickly start flying.

How does this device work?

The transmitter receives the video signal from the camera. It converts it into radio waves with a frequency of 5.8 GHz. The signal is then transmitted through the antenna to the glasses or monitor. You see in real time what the camera sees. This is FPV flight technology.

The operating principle is based on analog modulation. The signal is transmitted with minimal delay. This is critical for high-speed flights. Video quality remains stable even with interference. You will always be in control of the situation in the air.

Specifications and Compatibility

Boscam TS351 has specific parameters. The operating frequency range is 5.8 GHz. 32 channels are available for video transmission. The transmitter power is fixed - 200 mW. Supply voltage from 7 to 24 Volts. This allows the use of batteries from 2S to 6S.

A standard 3-pin connector is used for connection. Video input, power and ground are all you need. The transmitter is compatible with most analog cameras. For example, with Runcam, Foxeer and other brands. The antenna is connected via an SMA connector.

The device body is made of metal. It acts as an effective cooling radiator. This prevents overheating even during prolonged use. The dimensions of the transmitter are very compact. Weight is only about 15 grams.

The channel is configured using a button. Select the desired frequency directly in the field. The LED indicator displays the current channel. No complex programming required. The device is ready for use immediately after connection.

Specifications

• Operating frequency: 5.6-5.9 GHz
• Transmission distance up to 2 km
• Power: 6.5-15 V, 200 mA
• Dimensions: 55x26x17 mm
• Weight: 35 g.