Stack SoloGood F405 V4 BLS 60A

Choose the perfect control center - SoloGood F405 V4 BLS 60A stack for your drone!

For modern racing and freestyle quadcopters, where compactness, power and reliability are important, integrated electronics are becoming a key solution. The SoloGood F405 V4 BLS 60A Stack is a professional combination of flight controller and 4-in-1 ESC in one unit. It integrates the brain and power system of your drone, ensuring a clean build and superior performance. You can buy this modern stack for your project in the AEGISKY online store.

• Compact all-in-one integration for neat and easy drone assembly.

• Powerful flight controller powered by F405 processor with support for modern firmware.

• 4 speed controllers, 60A each for working with powerful motors on 6S.

• Built-in BEC 9V/2A system for stable power supply to peripherals.

• Many interfaces for connecting GPS, receiver, LED strips and other electronics.

Operating principle and functionality

Stack SoloGood F405 V4 BLS 60A is the central computing and power unit of the quadcopter. Its work begins with receiving commands from the pilot through the receiver. The signals are sent to the flight controller (FC). The STM32F405 microprocessor processes these commands along with data from the gyroscope and accelerometer. It calculates how much thrust each motor must produce to perform the maneuver.

The FC then sends high frequency digital signals (via DShot protocols) to the onboard ESCs. Each of the four ESCs converts battery energy into three-phase current for its motor. Integrating FC and ESC into a single board minimizes interference and latency. This gives the drone incredibly fast and accurate stick response.

Specifications and Applications

The technical parameters of the stack make it a leader in its class. The flight controller is based on an STM32F405 processor running at 168 MHz. It supports Betaflight and Emuflight firmware. Each of the four regulators provides 60A continuous current with up to 75A peak. The stack is fully compatible with lithium polymer batteries up to 6S (25.2V).

The device is equipped with all necessary ports. These are UART for GPS and telemetry, connectors for the receiver in SBUS/IBUS/SPI formats. There are also outputs for LED strips and buzzers. The built-in BEC regulator provides stable 5V and 9V to power the receiver, camera and other sensors. This eliminates the need for external BECs.

This stack is designed for dynamic and demanding flights. It will be an ideal choice for 5" class racing quadcopters where every millisecond matters. Its power is enough for aggressive freestyle on 6S batteries. The robust design is also suitable for advanced amateur builds. The firmware is configured through the convenient graphical interfaces of Betaflight Configurator.

Installing the stack greatly simplifies the drone assembly process. You do not need to run separate power wires to each ESC. This reduces overall weight, reduces clutter, and makes for a cleaner design. The stack comes with a safety capacitor to suppress voltage surges.

Specifications

• Main control: STM32F405
• Gyro: ICM42688P
• Barometer: Support SPL-06
• OSD: Support (AT7456E)
• BEC: 10V/2A, 5V/2A
• UART port: 6
• Black box: built-in flash memory (16 MB)
• Number of supported motors: M1-M8.
• Firmware name: BETAFLIGHT: SOLOGOODF405
• Input voltage: 3-6S lithium battery (11-30V MAX)
• Output voltage: VBAT
• Mounting hole: 30.5x30.5mm (4mm aperture).
• Flight control size: 38.5x38.5mm.
• Weight: 8.1 grams.