Servo drive JX Servo PDI-HV2060MG

Choose speed power - JX Servo PDI-HV2060MG servo drive for drone!

The JX Servo PDI-HV2060MG servo drive is a digital high voltage drive. This model combines significant force and high speed. It guarantees an instant response to control commands. You'll get superior precision for demanding applications. This servo will enhance the functionality of your copter.

Five main advantages of servo drive

• High torque 20kg*cm and speed 0.06s/60°.

• Operation from increased supply voltage up to 8.4V.

• Reliable metal gear (MG).

• Digital control for minimal response delay.

• Compact and lightweight standard size body.

Operating principle and technical parameters

The JX Servo PDI-HV2060MG servo drive accurately executes digital signals. It receives PWM command from the drone controller. The built-in microcircuit processes the received pulse. The motor rotates the gearbox until the specified angle is reached. The entire system works quickly, without backlash or delay.

Technical characteristics make it stand out from its analogues. The rated operating voltage is 6.0 V or 7.4 V. The torque reaches 20 kg*cm at 7.4 V. Rotation speed is a record 0.06 seconds per 60 degrees. The standard angle of rotation of the output shaft is 180 degrees. The device weighs only 61 grams thanks to its optimized design.

Control type: high-speed digital (Digital HV). A neodymium magnet motor core is used. This ensures high dynamics and efficiency. The metal gearbox can withstand severe shock loads. This transmission ensures durability and stable performance.

The servo drive housing is made of impact-resistant plastic. The shaft is reinforced with a metal bushing to increase service life. A standard three-wire connector is used for connection. Mounting levers and fasteners are included. The device is protected from overcurrent and overheating.

Specifications

• Signal: digital
• Maximum pulse width: 650-2350 µs, 180 degree angle (please note that the board
• control 500 250 µs cannot be used directly)
• Standard Pulse Width: 850-2150us(This item is ignored for remote control
• management)
• Dead zone: 4 µs
• Operating frequency: 1520μS/330Hz
• Connecting wire: about 260mm
• Working speed: (6.0V): 0.15 seconds/60°
• Working speed: (7.4V): 0.13 seconds/60°
• Stopping torque: (6.0 V): 48 kg.cm.
• Stopping Torque: (7.4V): 62kg.cm
• Operating temperature range: from -20 to +60°C
• Bearing: 2BB
• Output shaft teeth: 15t.
• Product size: 65.8 * 57.8 * 30mm / 22.59 * 2.25 * 1.18in
• Product weight: 197 g (wires included).