Maytech IP68 MTI70182 120KV Inrunner Motor

Choose Maytech IP68 MTI70182 120KV Rugged Motor for your drone!

Conquer the trails in any weather with this engine. The Maytech MTI70182 motor has an IP68 protection rating. It is reliably protected from water and dust. This is the solution for fearless pilots. The model uses the Inrunner design. It provides high speeds and smooth running. You will get stable work in difficult conditions. This is your choice for racing quadcopters. Order technological excellence from Maytech.

• Full protection against water and dirt (IP68).

• High-revving, smooth running Inrunner.

• Perfect balance of power and control (120KV).

• Compatible with popular racing frames.

• High efficiency and excellent build quality.

Operating principle and scope of application

The MTI70182 motor is brushless. The Inrunner type design has a special feature. A rotating rotor with magnets is located inside. It is surrounded by a stationary stator with windings. This reduces the rotor moment of inertia. The motor can accelerate and decelerate quickly. This scheme gives very high speeds. Engine operation is exceptionally smooth.

IP68 protection ensures complete sealing. The engine can withstand immersion in water. He is not afraid of wet grass and dirt. This saves your equipment in case of an accident. You can fly after rain without fear. This motor is designed for 5-6" racing drones. He will perform well on the track. FPV pilots will appreciate its reliability.

Use it on frames like Apex 5″, GepRC Mark5 or similar. The motor gives precise and predictable response. You will be able to perform complex maneuvers at speed. The engine works efficiently with 6S batteries. It provides powerful thrust for acceleration. At the same time, the motor does not overload the electronics.

Technical characteristics and equipment

Check out the exact Maytech engine specifications. Model MTI70182 has kV 120. This means 120 revolutions per volt. The operating voltage is 22.2V (6S). Peak current reaches 65A. The rated operating current is 45A. The motor power exceeds 1300 watts.

The case has a diameter of 37.5 mm. The height of the entire engine is 32 mm. The shaft diameter is 5 mm. The thread on the shaft is standard M5. The weight of the device is only 89 grams. The kit includes mounting bolts. The wires are already prepared for soldering.

To operate, you need an ESC. Choose an ESC with a current of 50A or more. We recommend branded Maytech controllers. Or use popular models from Hobbywing. Configure the motors using the BLHeli program. This will reveal the full potential of the device.

Use 5.1x3.1x3 or 5x4.3x3 propellers. They are ideal for 120KV value. This combination gives speed and control. Always calibrate the ESC after installation. Buy four motors for complete symmetry. This is the basis of a balanced and powerful power plant.

Specifications

• Motor type: brushless, touch/sensorless inrunner
• KV: 120
• Waterproof rating: IP68 (fully waterproof)
• Input Voltage: 6-14S LiPo (25-60V)
• Maximum current: 300 A
• Maximum power: 9 kW
• Purpose: eFoil, hydrofoils, electric surfs, jetboards, underwater robots
• Case diameter: 70 mm
• Case length: 182 mm.