Flyto 7.2G VRX RX7500 6000-7500 MHz video receiver module

Buy a Flyto RX7500 video receiver module for a pure analog signal at 7.2 GHz

The Flyto RX7500 video receiver module is a highly sensitive device for receiving analog video in the range of 6000–7500 MHz. It is suitable for FPV drones, ground stations and amateur radio projects. The module provides a stable signal with low latency over long distances.

The Flyto FPV brand is a Chinese manufacturer founded by the company. The company has been specializing in the development and production of FPV components since 2015. Flyto offers a wide range of video transmitters, receivers, cameras and antennas for drones. The brand's products are distinguished by affordable prices and stable quality. Flyto is actively developing new frequency ranges, including 3.3 GHz and 7.2 GHz. This allows pilots to use less congested frequencies for long-haul flights.

• 6000–7500 MHz range for operation on less congested frequencies.
• High sensitivity -95 dBm for reliable reception of weak signals.
• Two control modes: DIP switches (16 channels) and SPI.
• RSSI output for real-time signal strength monitoring.
• Compact dimensions 37x26.3x3.7 mm for easy integration.

How the Flyto RX7500 video receiver works

The module receives analog video signals in the range of 6000–7500 MHz. Built-in FM/PLL demodulator converts it to composite video signal (CVBS). 1 Vp-p video output compatible with most FPV goggles and monitors. RSSI output allows you to monitor signal strength for precise antenna tuning. 5V power supply and consumption up to 390mA make the module economical. Compact housing simplifies installation in drones and ground stations.

Technical characteristics and functionality

The RX7500 operates in the frequency range 6000–7500 MHz. Receiver sensitivity is -95 dBm. Intermediate frequency (IF) is 5400 MHz. Antenna input impedance - 50 Ohm. Video output impedance - 75 ohms. Video signal level - 1 Vp-p with negative polarity. Supply Voltage - 5 VDC. Current consumption does not exceed 390 mA.

RSSI voltage varies from 0.6 to 1.2 V. Operating temperature ranges from -10 to +65°C. Storage temperature - from -30 to +85°C. The module supports two frequency control modes. DIP mode provides 16 fixed channels. SPI mode allows access to an unlimited number of channels. Default frequency without SPI signal - 6150 MHz.

The module is compatible with PAL and NTSC analog video systems. It is ideal for FPV drones, CCTV and experimental projects. High sensitivity ensures stable reception even in interference conditions.

• Power: 5.0V
• Current consumption: max. 390 mA
• Frequency range: 6000–7500 MHz
• VSWR: 2:1
• Demodulation system: FM/PLL
• IF frequency: 5400 MHz
• ANT Input Impedance: 50 ohms typ.
• Local oscillator frequency stabilization: ±200 kHz
• Local oscillator frequency accuracy: ±200 kHz
• Local oscillator control: PLL
• Input LO leakage: -65 dBm
• Sensitivity: -96 dBm
• Video output impedance: 75 ohms typ.
• Video output level: 1 Vp-p typ.
• Video polarity: negative
• Video frequency response: ±5 dB max. 50Hz~6MHz
• Differential Gain: ±5% max.
• Differential phase: ±5% degrees max.
• Wideband IF 3 dB: 16.5 MHz
• Signal to noise ratio (S/N): 30 dB min.
• Output voltage RSSI (-30dBm~-90dBm): 1.2-0.6V
• Operating temperature: -10~+65ºC
• Storage temperature: -30~+85ºC
• Operating humidity: 85%RH
• Size: 37*26.3*3.7mm