Flysky FS-R7V receiver

Order the Flysky FS-R7V receiver for FPV drone - compact reliability for flights!

Flysky FS-R7V receiver is a compact and proven receiver for your drone. It ensures stable signal reception from the control panel. This model is ideal for small FPV quadcopters. You will get confident control at mid-range. This is a simple and effective solution for beginners and experienced pilots.

Key advantages of the receiver:

• Compact size and light weight for mini drones.

• 7 control channels for basic and additional functions.

• Stable operation via AFHDS 2A protocol.

• PPM sum signal output for easy connection.

• Affordable price and proven reliability.

This receiver will become your reliable link in the sky. It will ensure accurate transmission of commands from the remote control to the flight controller. You can concentrate on piloting and filming. Trust your communications to a popular and unpretentious device.

Operating principle and technical characteristics

The receiver operates at a frequency of 2.4 GHz, receiving a signal from the Flysky transmitter. It decodes the AFHDS 2A digital protocol to ensure noise immunity. The received data is converted into commands for the flight controller. The main channels control the throttle, rotation, pitch and roll of the drone. Additional channels can be assigned to useful functions.

The model supports data transmission via PPM (CPPM) output. This protocol combines all channels into one sequential stream. This approach greatly simplifies the connection to the controller. You only need three wires: power, ground and signal. This reduces wiring clutter for the compact drone.

The stated communication range reaches 700 meters in open areas. This is enough for most amateur FPV flights in line of sight. The system automatically hops channels to avoid interference. Your control will remain stable even next to other pilots.

The response time is about 14 milliseconds. This speed is enough for comfortable flight, freestyle and training races. You will not feel any noticeable delay between the drone's action and reaction. The device will obediently carry out your commands.

The receiver supply voltage is from 3.5 to 5.5 volts. It can be powered from the built-in BEC regulator or flight controller. The current consumption is very low, which does not load the on-board network. This is especially important for smaller drones with compact batteries.

Reliability and scope of application

The receiver body is very small and has only one connector for the PPM output. Two flexible and durable antennas ensure good signal reception. It is recommended to place them at a 90 degree angle for better coverage. This design is convenient for installation in tight frame spaces.

The receiver is compatible with many popular Flysky transmitters. For example, with models FS-i6, FS-i6X, FS-i10 and others that support AFHDS 2A. The pairing process is completed instantly. Simply press a button on the receiver and select a function on the remote.

This model is a classic choice for building an inexpensive and reliable drone. It is great for first projects, simulators and micro-devices. The receiver has been tested over the years by a huge community of pilots. Its disadvantages and advantages are well known.

The manufacturer has provided decent workmanship. The board is coated with a protective varnish that protects against moisture and condensation. The components are carefully soldered to ensure a long service life. This is not a flimsy toy, but a serious radio module.

Specifications

• PWM Channels: 7
• RF: 2.4 GHz meas.
• Maximum power: <20 dBm (e.i.r.p.) (EU)
• Antenna: single antenna
• Distance: 300m (distance to ground without interference)
• 2.4 G protocol: ANT
• Resolution: 4096
• Data output: PWM/PPM/i-BUS/S. Bus
• Input Power: 3.5~9V/DC
• Online update: Yes
• Temperature range: -10~+60
• Humidity range: 20%~95%
• Waterproof: PPX4
• Dimensions: 35.0mm * 23.3mm * 13.3mm
• Weight: 8.0 g.