Flipsky ESC 75200 84V controller based on VESC

Order the Flipsky ESC 75200 84V controller based on VESC for your quadcopter!

The Flipsky ESC 75200 84 controller is an electronic speed controller. It is needed to control electric motors in quadcopters. It is based on VESC technology. It is an open speed control system developed by Benjamin Vedder. This controller features high performance, a wide range of customizable parameters and ease of use.

The main features of the Flipsky ESC 75200 84 include a powerful STM32 processor. It has a 32-bit architecture, ultra-high resolution controlled current up to 840A. And also a wide voltage range from 8 to 85V, support for three-phase brushless motors, the ability to work with various types of encoders and Hall sensors. In addition, the controller supports communication protocols such as UART, CAN and USB. The device has a built-in current and voltage sensor. This allows for more accurate monitoring of system health.

One of the key features of the Flipsky ESC 75200 84 is its ease of setup and calibration. Users can easily configure controller parameters through dedicated software. It allows you to change parameters such as maximum speed, current, braking effect, acceleration and others. In addition, the controller supports FOC (Field-Oriented Control) and BLDC (Brushless Direct Current) operating modes. This allows you to optimize engine operation depending on specific operating conditions.

The Flipsky ESC 75200 84 controller is also highly reliable and protected against overloads and short circuits. Built-in protection against overheating and overload ensures stable and safe operation of the controller even during intensive use. In addition, the controller supports regenerative braking, which allows you to recover the energy released during braking or decelerating.

Specifications

• Firmware: 5.2, supports firmware upgrade.
• Voltage: 14-84V (safe for 4-20s).
• Continuous current: 50V/200A; 75 V / 150 A (values depend on installation, ambient temperature and air circulation /
• water around the device!).
• BEC: 5 V at 1 A.
• Support modes: DC, BLDC, FOC (sinusoidal).
• Rpm: 150000.
• Communication ports: USB, CAN, UART, SPI, IIC.
• Supported sensors: ABI, HALL, AS5047, AS5048A.
• Input source support: PPM, ADC, NRF, UART.
• Touchless control supported: Yes.
• Regenerative ability: Yes.
• Programmable via VESC_TOOL: Yes.
• 75200 Dimensions: 130 x 67.7 x 40.1 mm (including aluminum housing).
• Motor/Power Wire Size: 8 AWG.

Overall, the VESC-based Flipsky ESC 75200 84 controller is an excellent solution for controlling electric motors in quadcopters and other electric vehicles. Its high performance, wide functionality and ease of use make it an ideal choice for professional and amateur users who value quality and reliability in managing their devices.