DarwinFPV CineApe25 Kit with Walksnail Avatar (ELRS 2.4 GHz)

Order a profitable set - the DarwinFPV CineApe25 drone with the Walksnail Avatar digital system!

The DarwinFPV CineApe25 kit is a lightweight cinematic drone with a well-thought-out design. Its carbon frame includes top/bottom plates and removable propeller guards. The impact-resistant build can withstand falls, and the modular system makes it easy to replace damaged parts.

For flights, 1504-3600KV brushless motors are used, providing a balance of power and efficiency. Instead of an all-in-one board, a stack of F4 controller and 30A regulators is installed. This reduces the cost of repairs - individual components can be replaced.

CineApe25 supports popular Betaflight and INAV firmware, allowing you to adapt flight modes. Customize throttle curves, activate shooting modes, or auto-land through an intuitive interface.

Additional slots on the frame make it possible to install a GPS module or LED backlight. Change the configuration for different scenarios - from high-speed races to smooth panoramas.

Practicality and maintenance: minimum complexity

The drone weighs only 250g without battery, making it portable for travel. All connectors are labeled and the wires are neatly laid out - assembly takes minutes even for beginners.

Original spare parts are available at COPTERPARTS: from carbon plates to regulators. Video instructions and manuals on the website will help you quickly resolve issues.

Video shooting and control: stability and quality

The drone is compatible with the Walksnail Avatar HD system, transmitting video at 1080p/100fps or 720p/200fps. The camera is mounted on an anti-vibration suspension that reduces shaking. The signal remains clear even over long distances thanks to the low latency 2.4 GHz ELRS.

The package includes a 6S LiPo battery, spare propellers and a camera mount. CineApe25 is suitable for amateurs and professionals - shooting action scenes, chases or landscapes will be easier.

Order DarwinFPV CineApe25 from COPTERPARTS - get a reliable drone with easy setup. All brand components are in stock: from frames to controllers. Fly safely, repair quickly!

This kit includes

• Receiver HappyModel TXCO ELRS EP1 Dual (2.4 GHz)
• Quadcopter DarwinFPV CineApe25 with Walksnail Avatar (PNP (without receiver))
• RadioMaster 900mAh 3.7V Li-ion 18350 battery kit for Zorro equipment
• FPV video helmet Walksnail Avatar HD Goggles L
• GNB 3000mAh 2S 5C LiPo Battery for Skyzone / Fatshark Goggles (XT60, DC5.5)
• Adapter ToolkitRC XT60 (female) - XT30 (male)
• Charger ToolkitRC C4
• Battery CNHL Ministar 850mAh 4S 70C LiPo (XT30)
• RadioMaster Zorro control equipment (ELRS 2.4 GHz)

Characteristics

• Receiver: PNP (no receiver)
• Frame Pattern: True-X
• Frame size: 112 mm
• Size: 160 × 160 × 43 mm
• Flight controller: F411 MPU6500 AT7456E
• Ports:
  : 1 × SBUS (inverter RX1)
  : 2 × UART
  : 2 × Software Serial
  : 1 × I2C
  : 1 × RGB strip
  : 1 × under buzzer
  : 1 × user (A15)
  : 1 × USB
• Speed controller: BlueJay 3-4S 30A
• Digital system: Walksnail Avatar Mini 1S
• Motors: 1504 3600KV
• Propellers: HQProp T63MMX6
• Power connector: XT30
• Recommended battery: LiPo 4S 650-850 mAh
• Flight time: about 9 minutes (with 4S 850mAh battery)
• Weight: 145.9 g.