VIFLY Beacon

Order VIFLY Beacon for drone - a real lifesaver for your copter!

VIFLY Beacon for drone is a smart device for finding a lost quadcopter. It will automatically activate when the drone's main power is turned off. The lighthouse begins to emit a loud beep and flash a bright light. This allows you to quickly find the device in tall grass, bushes or a tree. This is a simple and ingenious solution that will save your drone and your nerves.

This device solves one of the most common problems of pilots - loss of the device. Often the drone crashes in a hard-to-reach place due to signal loss or breakdown. The standard beeper on the flight controller only works when powered. VIFLY Beacon has its own battery and is activated in the event of an accident. You'll spend minutes, not hours, searching. This is a must-have insurance accessory for every responsible pilot.

• Full autonomy with built-in battery, independent of drone power supply.

• Automatic activation when the main power supply to the copter is lost.

• Very loud beep (more than 100 dB) for hearing search.

• Super bright LEDs for visual detection in the dark or grass.

• Compact, lightweight and rugged housing for installation on any frame.

How does this emergency locator work?

The principle of operation of the beacon is simple and reliable. It is permanently connected to the drone's power circuit via a special cable. This cable supplies the beacon with voltage from the main battery. As long as there is voltage, the beacon is in sleep mode and does not consume its charge. As soon as the main power is lost (when the battery comes off or is completely discharged). The beacon instantly turns on sound and light alarms.

The key feature is an independent energy source. The built-in battery lasts for many hours of continuous operation. Even if the main battery falls out during impact, the beacon continues to send signals. You can search for the drone as long as you need. The signal is loud enough to be heard tens of meters away in the forest.

Technical characteristics and practical application

Specific options may vary slightly. Built-in lithium polymer battery with a capacity of about 150 mAh. Sound siren with a volume of over 100 decibels (very loud). Two ultra-bright LEDs (often white and RGB for flashing modes). The activation voltage is adjustable (usually triggers below 3V). The weight of the device is only about 10-15 grams, the size of a box of matches.

The functionality includes several useful modes. The main one is automatic, in case of power failure. Manual on/off mode using test button. Possibility of connecting to a free receiver channel for remote activation. Some models have a slow flashing mode to save battery. Indicator of battery charge (usually based on the color of the LED).

This device is a must have for anyone who flies outside of ideal areas. When flying in wooded or hilly areas where the drone is easy to lose. For racing pilots whose aircraft often fall into hard-to-reach places. For pilots engaged in long range flights over difficult terrain. Just for peace of mind to know that the chances of finding a downed drone are close to 100%.

Installing the beacon is simple and takes a few minutes. It can be glued with double-sided tape or tied to the frame with a tie. It is important to place it so that the sound is not muffled by the frame. Connect the signal wire to any free 5V pin on the board. Or connect directly to the battery balancing connector. After this, the lighthouse is ready for work and will wait in the wings.

The lighthouse is compatible with absolutely any type of quadcopters, airplanes, and helicopters. It does not interfere with video and radio equipment. Consumes negligible current in standby mode. It is often a requirement to fly at organized racing events. This is a sign of a pilot’s responsible approach to his hobby.

Specifications

• Size (L x W x H): 25x14x15 mm
• Weight: 6 grams
• Volume: Up to 105 dB
• Working time: Up to 30 hours
• Charging time: 1.5 hours
• Battery: 80 mAh LiPo
• Input voltage: 4.5 - 5.5 V.