Silicone braided copper cable 18AWG 2Pin 5m

18AWG 2Pin Copper Cable with Silicone Braiding for Quadcopters

18AWG silicone braided copper cable 2-pin can be used in the quadcopter for various purposes. Primarily for connecting electronic components, batteries, motors and controllers. In our online store AEGISKY.COM you can order a copper cable in silicone braiding 18AWG 2Pin 5m in unlimited quantities.

• AWG: 18.
• Diameter: 1.02 mm.
• Sectional area: 0.82 mm².
• External diameter: 2.3 mm.

Areas of application

1. Connecting motors. The cable can be used to connect the motors to the quadcopter flight controller. Typically, each motor has two wires - positive and negative. 18 AWG 2Pin silicone braided cable can be used to connect each motor to the flight controllers.

2. Battery connection. The cable can also be used to connect the battery to the flight controller. It usually has two contacts: positive and negative. The positive terminal of the battery is connected to the terminal on the controller. And the negative contact goes to another contact on the controller.

3. Connecting additional components.

It is important to connect the wires correctly according to the instructions provided by the manufacturer quadcopter and related components. Make sure the wires are well insulated and connected to avoid short circuits or damage to the wires.

Keep in mind that the use of cables and wires in quadcopters may vary depending on the specific model and settings. If you have additional questions, we recommend that you refer to the documentation.