Servo drive K-Power DMM012
Maximum torque: 2.3 kg cm at 6 V, 1.9 kg cm at 4.8 V
USD · Оптовые цены
Категории:
Сертификаты
Доставка 7-14 дней
DHL/FedEx/UPS/авиа/море
Оригинал гарантирован
Официальные поставщики
Полный пакет документов
ECCN, CO, CI, PL, EUS docs
Поддержка 24/7
До и после продажи
Экспортный контроль
EAR99AI уверенность 100% · Лицензия может потребоваться в зависимости от направления и конечного использования.
Программа лояльности
Скидка по уровню суммируется с оптовыми ценами
Buy the K-Power DMM012 compact digital servo for your FPV drone and RC models!
Provide precise and reliable control of actuators in confined spaces. The K-Power DMM012 Digital Micro Servo is designed for RC and UAV applications where compact size and light weight are critical. The device features high build quality and the use of premium components, including a metal gearbox and aluminum housing, which ensures long service life and stable performance.
It is an ideal choice for controlling payload release systems, miniature gimbal yaws and other actuators on lightweight FPV drones.
-
Digital control. Provides high positioning accuracy and fast position retention compared to analog counterparts.
-
Compact sizes. The 23.5x12.2x20.6mm body and weight of only 14g is ideal for installation in tight spaces .
-
Metal gearbox. Guarantees durability and resistance to shock loads during intensive use.
-
Aluminum housing Provides structural strength and efficient heat dissipation while maintaining stable performance.
-
Enough effort. Torque up to 2.3 kg/cm at a voltage of 6 V allows you to confidently control light mechanisms.
Operating principle and design
The K-Power DMM012 is a digital micro servo that converts electrical signals from a receiver or flight controller into precise mechanical movement of an output shaft. The digital control circuitry processes signals at high frequencies, ensuring higher angular resolution and precise position holding compared to analog servos . This is especially important for load release and gimbal control systems where precise and predictable positioning is required.
The robust metal gearbox provides high resistance to the shock loads that are inevitable during hard landings of drones. One precision ball bearing minimizes play on the output shaft, ensuring positioning accuracy even after long-term operation . The aluminum body effectively dissipates heat, maintaining stable performance under intense loads. It is important to note that this model is not protected from water, which should be taken into account when operating in conditions of high humidity.
Specifications and Applications
| Characteristics | Meaning |
|---|---|
| Dimensions (L×W×H) | 23.5 × 12.2 × 20.6 mm |
| Weight | 14 g |
| Operating voltage | 4.8 – 6.0 V DC |
| Torque (4.8V) | 1.9 kg/cm |
| Torque (6.0V) | 2.3 kg/cm |
| Speed (4.8V) | 0.12 sec/60° |
| Speed (6.0V) | 0.11 sec/60° |
| Control type | Digital |
| Gear material | Metal |
| Bearings | 1 ball bearing |
| Housing material | Aluminum |
| Water protection | No |
The servo is ideal for use as a drive for load drop systems on lightweight FPV drones, for controlling miniature gimbals, and for RC airplanes, helicopters and cars . High build quality and premium components ensure stable performance and durability in the harshest operating conditions.
Specifications
- Weight: 14 g
- Dimensions: 22.8 x 12.3 x 22 mm
- Maximum torque: 2.3 kg cm at 6 V, 1.9 kg cm at 4.8 V
- Operating voltage: 4.8 - 6 V
- Gearbox: metal
- Bearings: single bearing (single-way)
- Gear material: titanium (Titanium Gear).
