Servo drive EMAX ES3003
Operating voltage 4.8 V - 6.0 V
USD · Оптовые цены
Категории:
Сертификаты
Доставка 7-14 дней
DHL/FedEx/UPS/авиа/море
Оригинал гарантирован
Официальные поставщики
Полный пакет документов
ECCN, CO, CI, PL, EUS docs
Поддержка 24/7
До и после продажи
Экспортный контроль
9A018AI уверенность 100% · NLR — Лицензия не требуется. Рекомендуется заявление о конечном использовании.
Программа лояльности
Скидка по уровню суммируется с оптовыми ценами
Order the proven EMAX ES3003 analog servo for beginner FPV drone operators!
Start your journey into the world of drones with a reliable component. The EMAX ES3003 servo drive is the foundation for stable flight. It is designed for training models and novice pilots. This analog servo ensures predictable drone behavior. Your first flights will be safe and confident.
Five Key Benefits:
-
Proven reliability and durability of the design.
-
Ideal ratio between affordable price and quality.
-
Stable operation from standard voltage 4.8 V.
-
Compact dimensions and minimal weight.
-
Easy to connect and universally compatible.
This servo drive operates on an analogue principle. It receives an electrical signal from the receiver. An internal circuit analyzes the pulse width. The miniature motor begins to rotate through the gearbox. Plastic gears transmit movement to the output shaft. The potentiometer constantly monitors the position of the shaft. This ensures that commands are executed accurately.
Technical characteristics and scope of application
EMAX ES3003 has basic parameters. Its operating voltage is 4.8 V. The rotation speed is 0.20 sec/60°. Torque reaches 1.5 kg/cm. These characteristics are sufficient for training. The model demonstrates stability and predictability.
A gearbox with plastic gears is installed inside. This solution reduces the cost of the design. It remains reliable enough for beginners. The shaft rotates on a metal rolling bearing. This improves smoothness and accuracy. Mechanical play is also reduced.
The servo has a standard three-wire connector. The cable length is 25 centimeters. This is enough for convenient installation on the frame. The overall dimensions of the device are very small. They are 32x11x24 mm. The model will easily fit in limited space. Weight of only 10 grams will not weigh your drone down.
Specifications
- Operating voltage 4.8 V - 6.0 V
- STD Counterclockwise direction / Pulse travel 1500 to 1900 µs seconds
- Stop torque 4.8 V 3 kg.cm Max.
- Operating speed 4.8V 0.15 seconds/60.° no load
- Stop torque 6.0 V 3.5 kg.cm Max.
- Operating speed 6.0V 0.13 seconds/60.° no load
- Size 28.45x13.00x31.10 mm.
- Weight 17 g.
