FPV receiver RX3364-CPB
Supply voltage: 5.0V
USD · Оптовые цены
Категории:
Сертификаты
Доставка 7-14 дней
DHL/FedEx/UPS/авиа/море
Оригинал гарантирован
Официальные поставщики
Полный пакет документов
ECCN, CO, CI, PL, EUS docs
Поддержка 24/7
До и после продажи
Экспортный контроль
5A001AI уверенность 100% · NLR — Лицензия не требуется. Рекомендуется заявление о конечном использовании.
Программа лояльности
Скидка по уровню суммируется с оптовыми ценами
Order the reliable RX3364-CPB 3.3 GHz FPV receiver for clear video signals!
Get stable and clear pictures from your drone. The RX3364-CPB receiver operates in the 3.3 GHz band, which is lightly loaded with interference. The device provides high reception sensitivity and low noise level. You'll be able to fly further and more confidently in the most challenging conditions. Choose quality reception for your FPV equipment.
-
High sensitivity up to -97 dBm. Provides stable reception even at the extreme range.
-
Wide frequency range 3060–3500 MHz. Operates in the uncongested 3.3 GHz band with 64 channels.
-
Audio and video transmission. Get not only a high-quality picture, but also sound from the drone.
-
Low power consumption 380 mA. Saves battery power and extends flight time.
-
Compact size and easy integration. Easily fits into a ground station or handheld device.
Operating principle and key features
The RX3364-CPB video receiver converts the 3.3 GHz radio signal from the drone's transmitter into a composite video signal (CVBS). The device is based on FM/PLL technology, which ensures precise tuning and stable operation over a wide temperature range. The high sensitivity of the receiver (up to -97 dBm) guarantees reliable reception even at long distances and in conditions of radio interference. Low standing wave ratio (VSWR 2:1) and 50 ohm input impedance provide effective antenna matching.
The receiver supports 64 channels, which allows you to flexibly select a free frequency. It features a 6-position DIP switch for manual channel selection, making setup easy. The video output is 75 ohm impedance, which is compatible with most FPV monitors and goggles. The receiver also transmits audio, which is useful for monitoring motor performance and other audio notifications from the drone.
Specifications and Applications
| Characteristics | Meaning |
|---|---|
| Frequency range | 3060–3500 MHz (3.06–3.5 GHz) |
| Number of channels | 64 channels (selectable by DIP switch) |
| Sensitivity | -95 dBm ±2 dB (up to -97 dBm) |
| Supply voltage | 5V DC |
| Current consumption | ~380 mA |
| VSWR | 2:1 |
| Intermediate Frequency (IF) | 480 MHz |
| Antenna input impedance | 50 ohm |
| Video output impedance | 75 Ohm |
| Video signal level | 1 ±0.2 Vp-p |
| Demodulation system | FM/PLL |
| Operating temperature | -10 to +65 °C |
| Dimensions | 37 × 26.3 mm |
The receiver is ideal for use in ground stations, FPV goggles and portable monitors. Thanks to its compact size, it can be easily integrated into any device. A wide operating temperature range allows it to be used in various climatic conditions.
Specifications
- Supply voltage: 5.0V
- Channel: 64CH
- Channel selection: short key switch
- Receiving frequency range: 3060-3500 MHz
- Input Impedance: 50 Ohm Type
- Receiver sensitivity: -93 dBm ± 2
- Power supply current: 120mA
- Operating voltage range: 8-26V [8, 12, 26V (minimum, typical, maximum)]
- Video Bandwidth: 0-8.0 MHz
- Signal-to-noise ratio (S/N): 38 dB, min.
- Video Output Level: 1 ± 0.2 V-peak, Typ
- Video output impedance: 75 ohm, type
- Video Output Level: 1 ± 0.2 V-peak, Typ
- Antenna connector: RPSMA connector
- Operating temperature: -10~+85°C
- Storage temperature: -30~+85°C.
