Battery GNB 450mah 3S 80C HV

Order high voltage battery GNB 450mAh 3S 80C HV for dental twisters and mini drones!

Give your miniature FPV drone maximum performance and explosive dynamics. The GNB 450mAh 3S 80C HV high-voltage battery, created using LiHV technology, charges up to 4.35 V per cell. This provides 15-20% more power compared to conventional LiPo. Ultra-high current output of 80C (continuous) and 160C (peak) is ideal for aggressive freestyle and twister racing (2-3 inches). Compact dimensions and low weight allow you to maintain the perfect balance of the drone. Choose energy for victories.

• LiHV technology for maximum energy. Charge up to 11.4V (4.35V per cell) and get 15-20% more power than standard LiPo.

• Ultra-high current output 80C. Provides instant throttle response and stable power to powerful engines even under load.

• Peak current output 160C. Guarantees power reserves for sharp accelerations and complex maneuvers at the limit.

• Compact size and light weight (41-42 g). Ideal for 2-3" twisters and dental drones, maintaining perfect balance.

• Convenient XT30 connector and JST-XH balancer. Easy installation and reliable low resistance connection for efficient power transfer.

How does this high voltage battery work?

The battery uses three series-connected cells (3S1P) using LiHV technology. The LiHV battery charges up to 4.35 V per cell. This provides a significant gain in energy capacity without increasing weight. That's why these batteries have become the standard for miniature FPV drones (like Toothpick and Twig), where every gram counts.

The high current output of 80C means that the battery is capable of delivering current up to 36A for a short period of time (450mAh × 80C = 36A). This is enough for the most powerful micro-motors. Thanks to this, the pilot receives lightning-fast response to the throttle stick, allowing him to perform sharp accelerations, tight turns and maintain stable altitude even during aggressive piloting.

Specifications

• Capacity: 450 mAh
• Voltage: 3S1P / 3 Cell / 11.4 V
• Discharge current: 80 C continuous / 160 C peak
• Weight: 41.3 g (including wires, connectors and housing)
• Dimensions: 65x19x21 mm
• Balance connector: JST-XH
• Power connector: XT-30.