Servo drive DSSERVO CLS3355-270

Order the DSSERVO CLS3355-270 servo drive - incredible power for your drone!

Give your model true industrial strength. This servo drive is designed for the most demanding applications. It will provide precise control even under high load. Your heavy drone will maneuver flawlessly. This is the choice of professionals who value absolute reliability.

Main advantages of servo drive 

• High torque of 55 kg/cm for heavy models.

• Rotation speed is 0.12 seconds per 60 degrees.

• Durable gearbox made of metal gears.

• Programmable controller with configuration connector.

• Wide operating voltage range 6.0V – 8.4V.

These advantages set it apart from its analogues. A torque of 55 kg/cm is enough for the heaviest frames. High speed provides a sharp response to commands. The metal gearbox guarantees a long service life. The programmability allows the servo behavior to be adapted.

How does this powerful servo drive work?

The device receives a PWM signal from the flight controller. The built-in processor decodes the received commands. The brushless motor starts rotating at the desired speed. Through the gearbox, the movement is transmitted to the output shaft. The shaft rotates at a given angle with enormous force.

The operating principle is based on brushless technology. This ensures high efficiency and minimal wear. The microprocessor accurately tracks the position of the shaft. The system automatically adjusts the engine power. You get smooth and precise positioning.

Specifications and Applications

DSSERVO CLS3355-270 has outstanding parameters. The operating voltage is 6.0V – 8.4V (2S LiPo). Torque reaches 55 kg/cm at 8.4V. Rotation speed – 0.12s/60° at 8.4V. Control type – digital signal 760~2580μs. Device dimensions – 55.0×26.0×52.5 mm.

The weight of the servo is 125 grams. This is an excellent indicator for such power. Die-cast aluminum housing provides maximum rigidity. Metal gears withstand extreme loads. The ball bearing shaft minimizes backlash.

The servo drive is ideal for heavy duty helicopters and drones. It's great for controlling camera gimbals. Also for large aircraft and industrial models. It can handle the toughest mechanical tasks. You will be able to lift and move small loads.

Installation is carried out with standard M3 screws. The wire is 30 centimeters long. A separate cable is used for programming. Compatible with DSSERVO programmers and some others.

Specifications 

• Torque: 35 kg/cm at (5 V), 46 kg/cm at (7.4 V), 51 kg/cm at (8.4 V).
• Motor type: coreless motor;
• Speed: 0.18 sec/60.°(5V)/0.13 sec/60°(7.4V)/0.11 sec/60°(8.4V)
• Weight: 60 g (2.12 oz);
• Operating voltage: DC 5~8.4V; Deadmark: 2 μs;
• Size: 40 x 20 x 38.5 mm (1.5 x 0.79 x 1.50 inches);
• Gear type: stainless steel and aluminum;
• Operating frequency: 1520 μs/333 Hz.