Motor Flashhobby D2225 1600 KV

Order Flashhobby D2225 1600 KV Motor - Compact Power for Micro Drones

The Flashhobby D2225 1600 KV motor is the ideal choice for small quads. It delivers great performance in a small form factor. This motor creates a balance between thrust and rotation speed. Your micro drone will gain dynamics and responsiveness in flight. Enjoy the thrill of racing in a compact size.

Key advantages of the motor

• Compact and lightweight design. Minimally increases the overall weight of the drone.

• Optimal KV value for 2-3S assemblies. Provides high speed and controllability.

• Robust design with durable shaft. Withstands minor shocks and vibrations.

• Efficient heat dissipation. The case promotes good cooling.

• Versatility for racing and freestyle models. Suitable for different piloting styles.

The essence of the work and design

This is a brushless external rotation motor (outrunner). The magnets are located on the outer rotor, which rotates around the stator. The ESC controller supplies current to the three stator windings in a specific sequence. This creates a rotating magnetic field. It interacts with the magnets of the rotor, causing it to rotate. A KV value of 1600 indicates high response speed.

Specifications and Applications

The Flashhobby D2225 motor has a stator size of 22 mm by 25 mm. This is a classic size for micro and mini racing grade drones. Recommended supply voltage is from 7.4V (2S) to 11.1V (3S). The motor demonstrates excellent efficiency in this range. The maximum power reaches 150 W.

It fits perfectly with small propellers. Screws with a diameter of 4-5 inches are recommended. This is the standard for drones in the 3-4 inch category. To operate, you will need a compact ESC with a current of about 20A. Such a tandem will provide sharp and controlled acceleration.

The motor is often chosen for assembling Tiny Whoop racing drones and similar ones. It performs well in flights in confined spaces. It is also used in light freestyle models for tricks. Installation is easy thanks to standard mounting holes. Use M2 screws to attach to the frame.

Don't forget about regular maintenance. Clean the motor of dust and grass after flying. Periodically check the shaft play and the condition of the bearings. This will maintain its performance for a long time. Correct ESC setting is also important for smoothness.

Specifications

• KV: 1600 rpm per volt
• Voltage: 7.4V - 11.1V (2S-3S LiPo)
• Recommended ESC: 20A
• Motor dimensions: 22 × 25 mm
• Shaft diameter: 3.175 mm
• Shaft length: 41 mm
• Weight: 32 g
• Maximum thrust: 440 g
• Maximum power: 109 W.