Flight controller MATEKSYS H743 MINI V3

Order the MATEKSYS H743 MINI V3 flight controller for your drone and enjoy a stable flight!

The MATEKSYS H743 MINI V3 flight controller is designed for quadcopters. It combines power and compactness. This controller is perfect for racing and freestyle. The device is based on the STM32H743 processor. It provides high performance and fast data processing. H743-MINI V3 supports various flight modes. This makes it versatile for different management styles.

The controller has a built-in IMU with a high-precision gyroscope and accelerometer. These sensors ensure flight stability and precision. The H743 MINI V3 controller also supports GPS. This allows you to use the return home and navigation functions. The device is compatible with various firmware. You can choose between Betaflight, INAV and others.

Benefits and Features

One of the main advantages of the controller is its size. Compact dimensions allow the controller to be installed in small quadcopters. This is especially important for riders who need lightness and maneuverability. The controller has many inputs and outputs. You can connect all the necessary sensors and devices.

The flight controller supports various communication protocols. This makes it compatible with most radio transmitters. The device also has a built-in OSD. This allows you to see important information during the flight. You will be able to control the battery level and other parameters.

H743-MINI V3 has protection against overheating and short circuit. This increases the reliability and service life of the device. The controller is easily configured via a graphical interface. This simplifies the configuration process for beginners and professionals. You can also adjust various flight settings to optimize performance.

Specifications

• Microcontroller: STM32H743VIT6 (480 MHz)
• Gyro: ICM42688-P and ICM42605
• OSD: AT7456E (SPI2)
• Barometer: Infineon DPS310 (I2C2)
• Black box: MicroSD card slot (SDIO)
• UART ports: 5.5 (1,2,4,6,7, Rx8)
• PWM outputs: 11
• I2C: 2 (I2C1/DA1 CL1 pads, no I2C2 header)
• CAN: 1
• ADC: 5 (VBAT, Current, RSSI, VB2, CU2)
• Connector JST-SH1.0_8pin: 1 (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
• Input switch for two cameras
• 8V ON/OFF Power Switch
• Vbat input: 6.3 - 36 V (2-8S LiPo)
• BEC 5V: 1.5A (Max. 2A)
• BEC 8V: 1.5A (Max. 2A)
• LDO 3.3V: 200mA
• Static power: 200 mA at 5 V with Betaflight / 150 mA at 5 V with ArduPilot
• Supported firmware:
• ArduPilot, target MATEKH743
• BetaFlight, target MATEKH743
• INAV, target MATEKH743
• Mounting holes:
• With silicone bushings: 20 × 20 mm, Ø3 mm
• With silicone and brass bushings: 20 × 20 mm, Ø2 mm
• Dimensions: 36 × 28 × 6.5 mm
• Weight: 7 g.

In conclusion, the flight controller is a great choice for quadcopters. It combines power, compactness and functionality. This controller will allow you to enjoy your flight and reach new heights.