Engine MAD M30 IPE PRO 100KV

Choose smooth power for professional tasks - the MAD M30 IPE PRO 100KV quadcopter motor!

The MAD M30 IPE PRO 100KV motor is a low-speed brushless motor. This model is designed for professional kinetifters and heavy drones. It provides enormous torque at low revs. You'll get exceptional ride quality and load capacity. This engine will be the basis for your filming platform.

Five main advantages of the engine 

• High torque for lifting heavy cameras and stabilizers.

• Low operating speed (100KV) for maximum smoothness and efficiency.

• Professional build quality and durable components.

• Compatible with large propellers (15-18 inches) and high voltage.

• Optimal heat dissipation during continuous operation under load.

Operating principle and uniqueness of low-speed motors

The MAD M30 IPE PRO 100KV engine operates on the principle of energy conversion. It receives three-phase current from a powerful ESC controller. Its key feature is its low KV value (100 turns per volt). This means that as the voltage increases, the speed increases slowly. Instead, the motor produces colossal torque.

This design is ideal for creating a powerful yet smooth pull. It allows you to efficiently use the energy of a large capacity battery. The drone receives stable lift without sudden jerks. This is absolutely necessary for quality aerial photography. Your camera will not shake from motor vibrations.

Technical characteristics and scope of application

The technical parameters of the engine determine its professional level. The stator size is 50×30 mm. Rated operating voltage - from 6S to 12S (up to 50.4V). Low KV (100) allows the use of 15-18 inch propellers. This combination creates enormous thrust with low energy consumption. The weight of the motor corresponds to its power and reliability.

This engine is intended for specialized aircraft. It is the heart of heavy film drones and filming drones. It is chosen for lifting full-frame DSLR cameras. It is also used in research and industrial platforms. It is not suitable for racing or acrobatic flying.

Quality workmanship guarantees trouble-free operation. Precision bearings and reinforced steel shaft are used. The copper stator winding is made using special technology. The housing effectively dissipates heat even at low speeds. The design is designed for long flight sessions.

Requires a compatible ESC for operation. It must support high voltage and high constant current. The ESC setting should be for smoothness, not speed. Proper propeller selection is critical to efficiency. This will reveal the full potential of the power plant.

Specifications

• KV rating: 100KV
• Maximum thrust: 45.2 kg
• Maximum power: 13,263 W
• Maximum torque: 23.9 Nm
• Dimensions: 122 × 56 mm
• Engine weight: 1630 g
• Supply voltage: up to 12S LiPo
• Stator with anti-corrosion protection from Japan
• Degree of protection: IP35 (protection from dust and moisture).