Engine DarwinFPV HULK 2204.5 2450KV

Order the DarwinFPV HULK 2204.5 engine with 2450KV torque - incredible energy!

Feel the real power in every maneuver. DarwinFPV HULK 2204.5 2450KV is built for speed. This high-revving motor will give your drone lightning-fast response. It is ideal for dynamic racing sessions. You will get a sharp and aggressive response to the stick. The motor will unlock the potential of light and compact frames. Its reliability has been tested in harsh trail conditions. It will provide stability at high speeds. Your copter will become a real tool for victories.

Main advantages of the engine:

• High power and thrust for 3-4S power plants.

• Perfectly balanced for minimum vibration levels.

• Reliable protection of bearings from dust and contamination.

• Durable stator and lightweight aluminum alloy bracket.

• An excellent solution for 5-6 inch micro racing drones.

These advantages make HULK the best choice. You will appreciate its outstanding energy efficiency. Protected bearings will significantly increase service life. A balanced rotor ensures smooth flight. Clear control in corners will be guaranteed. The rugged design will withstand the inevitable collisions.

Technical essence and undeniable advantages

The engine operates on the principle of brushless technology. Electric current is supplied to the copper stator windings. The resulting magnetic field interacts with the rotor magnets. This causes the rotor to spin at great speed. A KV parameter of 2450 units indicates high rpm. This characteristic is ideal for 3S and 4S batteries. You will get sharp acceleration and a high top speed.

Specific technical characteristics confirm its class. The outer diameter of the motor is 22 mm. The stator height is 4.5 mm. This size is optimal for lightweight racing platforms. The weight of the motor is only 26.5 grams. You get a powerful power plant without overload. The propeller shaft thread is standard M5. This ensures compatibility with most screws.

The key feature is the stator design. It has 12 teeth and a N45SH winding pattern. This ensures maximum use of magnetic flux. You get high torque. Thrust reaches 870 grams with a 5x4.5x3 propeller on the 3S. And with a 4S battery the power is simply outstanding. The motor is equipped with double high-quality bearings. They provide smooth rotation without backlash.

The length of the wires is 150 millimeters. Their cross section is 1.25 square millimeters. This is enough for convenient installation on the frame. The durable aluminum housing effectively dissipates heat. This prevents the windings from overheating during peak loads. The engine is ready to install right out of the box.

Specifications

• Voltage: 2450 kV
• Configuration: 12N14P
• Stator size: 22*4.5mm
• Magnet: ARC N52H
• Shaft diameter (output): 5 mm
• Size: 26.9mm x 28.8mm
• Wire length: 95mm
• Number of cells (LiPo): 4 pcs
• Maximum continuous power: 432 W
• Maximum current: 27 A
• Mounting holes: 12mm
• Weight: 21 g.