BIGTREETECH Manta M4P motherboard

Order the BIGTREETECH Manta M4P motherboard for a powerful 3D printer upgrade!

BIGTREETECH Manta M4P motherboard is a modern 32-bit 3D printing controller. The model is designed to quickly launch Klipper without unnecessary wires. This board will take your printer to a new level of performance.

• Built-in BTB connector for direct installation of CB1 or CM4.
• 32-bit STM32G0B0RE chip at 64 MHz.
• Powerful TPS5450-5A chip with current up to 5 Amps.
• Compatible with Klipper and Marlin for any application.
• Rich expansion ports for BLTouch and RGB lighting.

Buy a modern board to get Klipper up and running quickly

BIGTREETECH Manta M4P board is equipped with a 32-bit ARM Cortex-M0+ microcontroller. The model has four axes for controlling motors. The board supports input voltage DC 12V or 24V. Powerful TPS5450-5A chip delivers up to 5 Amperes of current. At peak it reaches 6 Amps for stable operation.

The board dimensions for installation are 146 x 84.2 mm. The board has three fan ports with selectable voltage. 5V, 12V and 24V modes available for flexible settings. Manta M4P supports TMC2209, TMC5160 and other drivers. The board is perfect for Voron V0 and Ender 3 printers.

A special feature of the model is the built-in BTB connector. It is compatible with Raspberry Pi CM4 and BTT CB1. You can install the module directly on the board. This eliminates unnecessary wires and adapters. The module fastening is further reinforced with screws. The board supports installing firmware via SD card.

Manta M4P has a built-in HDMI port for video output. DSI and CSI interfaces available for camera and display. The board supports thread break sensor and auto shutdown. Built-in BLTouch port simplifies automatic table calibration.

Choose quality boards from the manufacturer BIGTREETECH

Manufacturer BIGTREETECH is a team from Shenzhen. The company name is Shenzhen BIQU Technology Co., Ltd. BIGTREETECH specializes in controllers for 3D printers. The brand's products are extremely popular among enthusiasts. BIGTREETECH engineers are constantly improving their designs. All boards undergo strict quality control. The manufacturer offers open source software. This allows you to fine-tune the printer for any task.

A special feature of BIGTREETECH boards is their thoughtful design. Manta M4P has USB and Ethernet ESD protection. Thermistors are protected against heater current leakage. Multi-colored connectors reduce the risk of connection errors. The board is compatible with most popular 3D printers. Manta M4P is the perfect choice for Voron V0. The board is also great for upgrading Ender 3. BIGTREETECH offers complete technical documentation and support. The company is actively updating firmware and drivers.

• Supported modules: BTT CM4 (based on Rockchip RK3566), CM4 (Raspberry Pi), CB1 (based on Allwinner H616)
• Board size: 162 x 160 mm

Processor

• The processor from the installed computing module is used (for example, RK3566 for BTT CM4)
• When using BTT CM4: 4-core ARM Cortex-A55, 1.8 GHz, NPU up to 0.8 TOPS

Memory:

• RAM: 4GB LPDDR4
• Storage: depends on the module (eMMC or MicroSD)

Communications and interfaces:

• Ethernet: 10/100/1000 Mbps
• Wi-Fi: built-in (on BTT CM4 and CB1 modules)
• USB: 2 x USB 2.0, 1 x USB 3.0
• Bluetooth: on some modules

Connectors for connecting 3D printer peripherals:

• Stepper motor drivers: up to 8 drivers (TMC2209, TMC5160, etc.) via stepper driver slots
• Thermal sensor inputs: 5 (thermistor, PT100, PT1000, MAX31865, etc.)
• Heater outputs: 4 channels (HE0, HE1, HE2, HE3), 24V
• Fans: 5 ports (Fan0, Fan1, Fan2, Fan3, Fan4)
• Encoders: support
• Proximity sensor: support
• BLTouch: support
• Voltage sensor: support
• Ports EXP1, EXP2: for display
• MicroSD slot: on board for bootloader firmware update
• CAN interface: support CAN FD

Food

• Input voltage: 12–24 V
• Maximum current: 15 A

Firmware:

• Klipper (main firmware)
• Marlin (optional, via compute module