Microcomputer multitool Flipper Zero

Buy the Flipper Zero portable multitool for research and testing of digital systems!

Get your hands on the Swiss Army knife for penetration testers and geeks. This compact gadget combines dozens of tools for working with radio frequencies, access control systems and digital interfaces. The device looks like a game console, but hides powerful functionality for studying surrounding electronic systems. A built-in Tamagotchi with a pixelated dolphin will make the learning process fun.

• Multifunctionality. Supports Sub-1 GHz radio, RFID 125 kHz, NFC 13.56 MHz, infrared, iButton and GPIO.

• Open architecture. Completely open source code and circuitry for creating your own plugins and firmware.

• Autonomy. The built-in 2100 mAh battery provides up to 28 days of operation without recharging.

• Versatility of connection. GPIO interface for connecting external modules, USB Type-C for HID emulation and charging.

• Intuitive controls. 5-way joystick and 128x64 pixel monochrome display for easy navigation.

Operating principle and capabilities of the device

Flipper Zero operates as a completely independent, portable tool that does not require a computer connection. Its heart is the STM32WB55RG microcontroller with a 64 MHz Cortex-M4 core, 256 KB of RAM and 1 MB of internal memory. All data is stored on a microSD card up to 256 GB, and management is carried out through a simple and intuitive interface.

The main feature of Flipper Zero is the built-in Tamagotchi. The pixelated dolphin on the screen grows and changes its mood depending on how actively you use the device. This is not just a game element, but a way to involve the user in exploring the capabilities of the gadget. Each new action increases the level of the virtual pet, turning exploration into an exciting process.

Technical characteristics and areas of application

Flipper Zero supports a variety of communication protocols. The CC1101 radio module operates in the ISM bands 315/433/868/915 MHz and allows you to analyze signals from remote controls, barriers and sensors. The ST25R3916 NFC module at 13.56 MHz reads and emulates MIFARE Classic, Ultralight and DESFire access cards. The 125 kHz RFID part works with EM4100, HID Prox and other keys. The infrared port is capable of remembering and reproducing commands from almost any remote control.

Via GPIO you can connect external sensors, Wi-Fi modules, or use Flipper Zero as a USB-UART adapter. When connected to a computer, the device can emulate a keyboard to automate input (BadUSB) or serve as a U2F key for two-factor authentication. All these features make Flipper Zero an indispensable tool for testing smart home security, testing access systems and studying radio technologies.

Characteristics

• Connection: USB 2.0 port (Type-C)
• Housing materials: PC, ABS, PMMA
• Dimensions: 100×40×25 mm
• Weight: 102 g
• Operating temperature: 0…+40 °C
• Microcontroller
• Chip: STM32WB55RG
• CPU: ARM Cortex-M4 (64 MHz)
• Network processor: ARM Cortex-M0+ (32 MHz)
• Bit size: 32 bits
• Flash memory: 1024 KB
• SRAM memory: 256 KB
• Display
• Type: monochrome LCD
• Diagonal: 1.4″
• Resolution: 128×64
• Display controller: ST7565R
• Interface: SPI

Battery

• Battery type: lithium polymer (Li-Pol)
• Capacity: 2000 mAh
• Battery life: up to 7 days
• ISM radio module
• Chip: TI CC1101
• Transmitter power: 0 dBm (1 mW)
• Modulation: AM, PSK, FSK
• Frequency range (depending on your region):
• 315 MHz
• 433 MHz
• 868 MHz
• 915 MHz
• NFC module
• Operating frequency: 13.56 MHz
  

  Supported cards:

• ISO-14443A/B
• NXP Mifare® Classic / Ultralight / DESFire etc.
• FeliCa™
• NFC Forum protocols
• RFID module
• Operating frequency: 125 kHz

Supported cards:

• EM400x, EM410x, EM420x
• HIDProx, Indala
• Input/Output Pins (GPIO)
• Logic One Voltage: 3.3 V (CMOS)
• 5V input voltage tolerance
• Maximum current from digital pin: 20 mA
• Bluetooth module
• Version: Bluetooth LE 5.0
• Transmitter power: 0 dBm (1 mW)
• Receiver sensitivity: -96 dBm
• Data transfer rate: 2 Mbps
• microSD slot
• Supported cards: microSDHC up to 64 GB (FAT32)
• Read/write speed: up to 5 Mbps
• Squeaker
• Type: piezo tweeter
• Frequency range: 100–2500 Hz
• Volume: 87 dB
• Vibration motor
• Force: 30 N
• Speed: 13500 rpm
• IR transceiver
• Wavelength: 800–950 nm
• Transmitter power: 300 mW
• iButton 1-Wire module
• Operating modes: reader / writer / emulator
• Supported protocols:
• Dallas DS1990A
• CYFRAL
• Controls: 5-button cursor
• Back button
• Restart: “left” + “back” (press and hold for 2 seconds).