ESC regulator Axisflying ARGUS PRO ECO 80A ESC

Conquer the sky with the Axisflying ARGUS PRO ECO 80A ESC controller!

This speed controller is made for true FPV enthusiasts. It will provide your drone with uninterrupted power. You'll get the most out of your powertrain. Your flights will become even more dynamic and reliable. Trust your electronics to the professionals.

Key benefits:

• High continuous current of 80A for extreme loads.

• Supports modern 48 and 64 bit protocols.

• Efficient cooling system based on power MOSFETs.

• Reliable protection against overheating and overcurrent.

• Durable and lightweight PCB board with varnish.

This ESC will become the heart of your copter's power system. It guarantees smooth and powerful acceleration. You will forget about traction failures in maneuvers.

Technical equipment and operating principle

The regulator converts direct current from the battery. It supplies the motors with a pulsed current with variable duty cycle. The frequency and width of these pulses are constantly changing. This allows precise control of the rotation speed of each motor.

With support for DSHOT1200 protocols, your commands are transmitted instantly. Minimal latency makes the drone responsive. You will feel complete control over the device. This is critical for racing and freestyle flying.

The ARGUS PRO ECO 80A model is built on an advanced element base. It uses low-resistance high-power field-effect transistors (MOSFETs). This significantly reduces heat dissipation under high load. Energy is spent on movement, not on heating.

Automatic RPM calibration greatly simplifies setup. You don't need to select parameters manually. The system itself adapts to your engines. This will save you time and nerves before your first flight.

Built-in overcurrent protection protects your investment. It will instantly react to a jammed propeller. This will prevent failure of the regulator and motor. You will be able to quickly get back into the air after a minor incident.

The overheat protection function will save the device on a hot day. Electronics constantly monitors the temperature of power switches. When critical heating occurs, the power is automatically reduced. This extends the life of the ESC even under intensive use.

Reliability in every detail

The manufacturer used a high-quality multilayer PCB board. It has increased mechanical strength. A special varnish coating protects against moisture and dust. This increases the component's durability under harsh conditions.

Effective heat dissipation is implemented without a bulky radiator. The heat from the MOSFET is evenly distributed throughout the board. It then quickly dissipates in the air flow. This allows you to maintain compact and lightweight dimensions of the product.

ESC is fully compatible with popular flight controllers. It easily integrates into any Betaflight or Emuflight based build. The connection and setup process will not cause difficulties. Even beginners will be able to quickly install and configure the device.

Choose Axisflying ARGUS PRO ECO 80A for your drone. It's an investment in the stability and power of your powertrain. Control every movement with millisecond precision. Enjoy absolute reliability on every flight.

Specifications

• Rated current: 80 A
• Maximum current: 90 A (in short load mode)
• Lithium battery support: 4-6S LiPo
• Processor: 32-bit MCU STM32F722
• Gyro: ICM42688P for smooth and precise motor control
• Dimensions: 57 × 56 × 6 mm
• Weight: about 27g
• Firmware: BLHeli_S (or support for others is possible)
• Interfaces: 4 UART ports, telemetry and temperature protection
• Mount: standard 30.5×30.5 mm with M4 holes (with the possibility of using a soft
• M3 mounts)
• Cooling: Aluminum radiators for efficient heat dissipation
• Features: Fast throttle response, high efficiency and stable operation,
• protection against overheating and overvoltage
• Recommended for 15" racing and freestyle drones with high loads.