Engine DarwinFPV 2307.5 1960KV

Order DarwinFPV 2307.5 motor with 1960KV torque - power and speed for your drone

Meet the engine that will change the way you fly. DarwinFPV 2307.5 1960KV is designed for pilots who strive for excellence. This motor will give your drone incredible thrust and responsiveness. You will forget about power failures in the most difficult maneuvers. It will be an ideal choice for aggressive freestyle and high-speed racing. Its reliability has been proven by thousands of flights. Every detail is thought out for maximum performance. Your copter will accelerate at lightning speed. It will provide smoothness and control on the track.

Key advantages of the engine:

• Outstanding power and high torque.

• Complete protection of bearings from dust and dirt.

• Ideal factory rotor balancing.

• Robust and lightweight stator design.

• Stable operation at high speeds.

These advantages make the motor a universal tool. You will feel real power in your flights. Bearing protection will significantly increase their service life. Perfect balancing will eliminate vibrations in the video. Durable construction will withstand rough landings. The engine will serve you long and reliably.

Operating principle and technical excellence

The motor converts electrical energy into mechanical energy. The current from the regulator is supplied to the copper stator windings. This creates a powerful magnetic field. It interacts with the permanent magnets of the rotor. As a result, the rotor begins to rotate at tremendous speed. The key parameter KV shows the number of revolutions per minute. It indicates the revolutions when one volt is applied. The 1960KV model works perfectly with 6S batteries. You will get an excellent balance between traction and speed.

Specific characteristics reveal the essence of its capabilities. The stator diameter is 23 mm. Its height is 7.5 mm. This is a modern and popular size for racing drones. It provides an excellent power to weight ratio. The maximum thrust reaches an impressive 1800 grams. This is with the HQProp 5.1x3.1x3 propeller on the 6S. The engine weight is only 34.5 grams. You get tons of power without the extra load. The shaft thread for the propeller screw is standard M5. This ensures reliable fastening of any popular model.

The motor housing is made of durable aluminum alloy. It effectively removes heat. This prevents the windings from overheating even under prolonged loads. The shaft is made of hardened stainless steel. It has increased resistance to bending. Double ball bearings ensure smooth rotation. Special shields protect them from abrasive dust. This is critical to preserving the resource. The motor is supplied with 120 mm long wires installed. Their cross section is 1.25 square millimeters. This is sufficient for most drone configurations.

Specifications

• Model: Hulk 2307.5 Sea-water-proof motor
• KV value: 960KV
• Stator size: about 23×7.5mm
• Rated voltage: 24V
• No-load current: 2.16A/24V
• Maximum current: 40A
• Maximum power: 960 W
• Number of slot poles: 12N14P
• Output shaft specifications: about 5×14mm
• Phase-to-phase resistance: 69mΩ
• Bearing specifications: about 4x9x4mm
• Rotor type: split
• Magnetic Steel Type: N52H
• Winding: single core winding
• Output specification: 20AWGx150mm
• Mounting hole: 16×16mm (M3)
• Product size: about 28x34mm.