Antenna Harxon HX JH002

Order the reliable Harxon HX JH002 antenna for a wide range of scenarios!

The Harxon HX JH002 model is designed for professionals. It provides uncompromising positioning accuracy. This antenna is designed to operate in difficult electromagnetic environments. It will cope with powerful interference and strong signal reflections. Your equipment will receive stable and reliable data.

This model is used in demanding areas. It is used for precision agriculture. It is ideal for autonomous driving systems. Surveyors use it in urban canyons. Robotics and drones are key areas. Marine navigation also benefits from its immunity to interference. It is suitable for any critical projects.

Technical excellence and key benefits

The HX JH002 antenna has unique characteristics. She guarantees results where others fail. Here are the five main parameters of this model:

• Dual-frequency reception of signals from all major satellite systems.

• Highest level of protection against powerful multi-path interference.

• Stable operation near strong sources of electromagnetic interference.

• Rugged, sealed housing with protection degree IP67.

• Wide operating voltage range for versatility.

The advantages of this antenna will be appreciated by demanding users. It provides reliability in the most difficult conditions. You receive accurate data without failures or losses. The case reliably protects the electronics from moisture and dust. The antenna is resistant to vibrations and harsh use. This ensures a long service life of the device. Wide power range simplifies integration. Compatibility with most OEM platforms will not cause problems. You will significantly increase the fault tolerance of your system.

ANTENNA CHARACTERISTICS

• Tracking: GPS L1/L2. BeiDou B1
• SWR (VSWR): ≤ 1.5
• Impedance: 50 Ohm
• Polarization: Right Circular (RHCP)
• Axial ratio: ≤ 3dB
• Coverage Angle:
• Azimuth: 0–360°
• Elevation: 0–90°
• Maximum gain: 3.5 dBic on B1/L1, 2.5 dBic on L2

ELECTRICAL CHARACTERISTICS

• LNA Gain: 35 ±2 dB
• Out-of-band rejection: 85 dB at 50 MHz
• Overload resistance: ≥ 10W
• Noise figure: L1: ≤ 2.0, L2: ≤ 2.5
• Group delay: ≤ 10 ns
• VSWR: ≤ 2.0
• Operating voltage: 5-12V
• Current consumption: ≤ 150 mA

SYSTEM CHARACTERISTICS

• Phase center error: ≤ 3mm
• Positioning accuracy: Static - at the millimeter level
• Compatibility: Supports boards from different manufacturers (sometimes LNA gain adjustment is required)

MECHANICAL CHARACTERISTICS

• Dimensions: 80×80×16.6 mm (excluding connectors)
• Weight: ≤ 75g
• Mounting: M2.5 screws
• Connector: SMA (male)

OPERATING CONDITIONS

• Operating temperature: –40°C to +70°C
• Storage temperature: –45°C to +85°C
• Quality class: Industrial
• Certification: RoHS
• Localization percentage: 100%.