サーボ drive WAVGAT TD-8135MG

Buy a powerful WAVGAT TD-8135MG servo for heavy RC models

WAVGAT is a Chinese brand specializing in low-cost electronic components. The company produces servos of various powers, Arduino and Raspberry Pi boards. The range also includes sensors, LED modules and displays. The products are aimed at the DIY community, education and beginner design. WAVGAT offers budget solutions for radio amateurs.

• Peak stopping torque 35.2 kg cm at 7.2 V.
• Metal gears for maximum reliability.
• Rotation angle up to 360° (180°±3° on signal 500–2500 µs).
• Double bearings for smooth rotation.
• Digital controller for precise positioning.

How a powerful digital servo works

The digital controller receives a PWM signal from the receiver. The pulse duration sets the target rotation angle. The microcircuit compares it with the current position. When diverging, the motor rotates the metal gears. Double bearings reduce friction and play. The potentiometer constantly reports the actual position of the shaft. The shaft rotates precisely to the desired angle with high frequency.

Technical characteristics and functionality

Model TD-8135MG operates at a voltage of 4.8–7.2 V. The no-load speed is 0.32 s/60° (at 4.8 V). At 7.2V the speed improves to 0.22s/60°. The peak stopping torque at 4.8 V is 32.7 kg cm. At 7.2 V the moment increases to 35.2 kg cm. The quiescent current is 140–200 mA. The stopping current reaches 2600–3400 mA.

The servo drive has 5 metal gears and double bearings. The body is made of PBT engineering plastic and aluminum alloy. The dimensions of the device are 40.0×20.5×40.5 mm. Weight is 56 grams ±5%. Connecting wire length 320 mm ±5 mm.

The pulse width range is 500–2500 µs. The neutral position corresponds to 1500 µs. The rotation angle reaches 180°±3° with a signal of 500–2500 μs. The Dead zone is 5 microseconds. Operating temperature ranges from -25°C to 70°C.

• Storage temperature range: -30°C～80°C
• Operating temperature range: -25°C～70°C
• Temperature range: -25°C～70°C
• Humidity range: 65%±10%
• Size: 40.0*20.5*40.5 mm
• Weight: 56g ± 5%
• Gear type: 5 Metal
• Angle limit: 360°
• Bearing: 2BB
• Spline Gear: 25 teeth, outer diameter: 5.9mm
• Horn type: plastic, POM
• Housing: Engineering plastic (PBT) + aluminum alloy
• Connecting wire: 320mm±5mm
• Motor: Carbon brush motor
• Splash-resistant: No
• Operating voltage: 4.8V-7.2V
• Quiescent current: mA
• No-load speed: 0.32sec/60°-0.22sec/60°
• Current consumption: 140mA 200mA
• Peak stopping torque: 32.7 kg cm 35.2 kg cm
• Stop Current: 2600mA±10% - 3400mA±10%
• Operating voltage range: 4.8 - 7.2 V
• Command signal: pulse width modulation
• Amplifier Type: Digital Controller
• Pulse width range: 500～2500us
• Neutral position: 1500 µs
• Rotation Angle: 180°±3°(when 500～2500μs)
• Dead zone width: 5 µs