Servo drive JX CLS-12V7346
Bandwidth: 2us-1520us/330Hz
USD · Volume pricing available
カテゴリー:
Certifications
Global Shipping 7-14 Days
DHL, FedEx, UPS, Air & Sea
Genuine Products
Authorized distribution
Export License Ready
ECCN, CO, CI, PL, EUS docs
24/7 Tech Support
Pre & post sales
Export Compliance
EAR99AI confidence 100% · NLR — No license required. Standard end-use statement recommended.
Buyer Tier Benefits
Tier discounts stack with volume pricing. Automatically applied after your first order.
Order precision and power - JX CLS-12V7346 servo drive for your drone!
The JX CLS-12V7346 servo drive is a high-torque digital drive. This model is designed for critical mechanical systems. It provides precise positioning at high speed. You will get reliable effort to control the camera or mechanisms. This servo will be the key element of your project.
Five main advantages of servo drive
-
High torque of 46 kg*cm for work under load.
-
Fast response and positioning speed.
-
Digital control with smooth and precise operation.
-
Reliable metal gear drive.
-
Wide range of operating supply voltages.
Operating principle and technical features
The JX CLS-12V7346 servo drive converts an electrical signal into mechanical movement. It receives commands from the flight controller or receiver. An internal circuit compares the set and current shaft position. The motor rotates the output shaft until the desired angle is reached. This ensures accurate completion of any assigned task.
Technical characteristics demonstrate its high class. The nominal operating voltage is 12.0 Volts. The torque reaches an impressive 46 kg*cm. The rotation speed is 0.20 seconds per 60 degrees. These parameters guarantee powerful and fast response. The device weighs 105 grams, which is typical for this form factor.
The control type is digital, which ensures high accuracy. Uses brushless motor for smoothness and durability. The gear is made of durable metal alloy. This eliminates wear and play even during intensive use. The shaft rotates at a standard angle of 180 degrees.
The servo comes with a JR type connector for universal connection. Mounting hardware included for easy installation. It has protection against overload and overheating. This significantly increases the overall resource of its work. The device is ready for use in various weather conditions.
Specifications
- Bandwidth: 2us-1520us/330Hz
- Operating voltage: 6-15V (optimal voltage ranges from 12V to 14/15V)
- When the operating voltage is less than 12V (such as 11V, 8V), the servo can also work, but
- The rotation speed is low and the power is low. Operating speed (11.1V): 0.12sec/60°
- Operating speed (14.0V): 0.10 sec/60°
- Maximum remote control angle: 120°
- Maximum control panel tilt angle: 0.5ms-2.5ms = 180°
- Stopping torque (11.1V): 38kg.cm
- Stopping torque (14.0V): 47kg.cm
- Bearing: 2B
- Connecting wire length: about 265mm
- Size: about 40*20*37mm.
