Microcomputer Raspberry Pi Pico 2 RP2350
Microcontroller: RP2350A
USD · Volume pricing available
カテゴリー:
Certifications
Global Shipping 7-14 Days
DHL, FedEx, UPS, Air & Sea
Genuine Products
Authorized distribution
Export License Ready
ECCN, CO, CI, PL, EUS docs
24/7 Tech Support
Pre & post sales
Export Compliance
4A003AI confidence 100% · NLR — No license required. Standard end-use statement recommended.
Buyer Tier Benefits
Tier discounts stack with volume pricing. Automatically applied after your first order.
Buy the powerful Raspberry Pi Pico 2 RP2350 microcomputer for your DIY projects and drone systems!
Get your hands on the latest microcontroller from Raspberry Pi, built for your wildest ideas. Raspberry Pi Pico 2 is equipped with a unique RP2350 chip with a hybrid architecture combining ARM Cortex-M33 and RISC-V Hazard3 cores. The device operates at up to 150 MHz and has 520 KB of SRAM, which is double the size of the previous model.
This platform is ideal for creating telemetry ground stations, drone controllers, robotics and complex IoT projects where compactness and performance are important.
-
Hybrid dual architecture. Supports ARM Cortex-M33 and RISC-V Hazard3 for maximum development flexibility and task optimization.
-
Increased memory. 520 KB of on-chip SRAM and 4 MB of Flash memory allow you to run more complex programs and algorithms .
-
Advanced I/O functionality. 26 multifunctional GPIOs with PWM support, 12 programmable PIO machines to create your own interfaces .
-
Wide power range and energy efficiency. Operates from 1.8 to 5.5V and consumes less than 1uA in deep sleep mode.
-
Increased security and compatibility. TrustZone hardware protection and full backwards compatibility with Raspberry Pi Pico projects.
Operating principle and computing power
The Raspberry Pi Pico 2 is a system-on-a-chip designed to run a single program without an operating system. The RP2350 microcontroller can flexibly switch between two ARM Cortex-M33 cores and two RISC-V Hazard3 cores, allowing the designer to choose the architecture for a specific task. The built-in 520 KB of RAM provides sufficient resources for processing telemetry, working with sensors and executing complex stabilization or navigation algorithms for unmanned systems.
With 26 GPIO pins and 12 programmable PIO machines, you can connect and create drivers for any sensors, receivers, and actuators without loading the main processor core.
Technical characteristics and interfaces
| Characteristics | Meaning |
|---|---|
| Microcontroller | RP2350A |
| Cores | 2× ARM Cortex-M33, 2× RISC-V Hazard3 (up to 150 MHz) |
| Memory | 4 MB Flash, 520 KB SRAM |
| GPIO | 26 multi-function contacts |
| Hardware interfaces | 2× UART, 2× SPI, 2× I²C |
| PWM channels | Up to 24 simultaneously |
| ADC | 3 × 12-bit |
| Programmable I/O | 12 PIO machines |
| USB | 1.1 (Host/Device) |
| Input voltage | 1.8 – 5.5 V (via VSYS) or 5 V via Micro-USB |
| Consumption in sleep mode | < 1 µA |
Specifications
- Model: Raspberry Pi Pico 2
- Peripheral Port: USB 1.1 (Device/Host)
- Microcontroller: RP2350A
- Cores:
- 2× ARM Cortex-M33
- 2× RISC-V Hazard3
- Clock frequency: 150 MHz
- Flash memory: 4 MB
- SRAM memory: 520 KB
- Input supply voltage:
- Via USB: 5V
- Via VSYS pin: 1.8–5.5 V
- Logic level voltage: 3.3 V
- General purpose contacts:
- Total physical contacts: 43 (20 + 20 + 3)
- GPIO I/O pins: 26
- PWM contacts: 26 (up to 24 simultaneously)
- ADC pins: 3
- Hardware interfaces: 2× UART, 2× SPI, 2× I²C
- Programmable interface PIO: 12
- Built-in peripherals:
- Real Time Clock (RTC)
- Temperature sensor.
