ESC regulator Makerbase MKSESC84100HP 84V 100A

Order ESC regulator Makerbase MKSESC84100HP 84V 100A - power for serious projects

Looking for a reliable ESC for high-load systems? Check out the Makerbase MKSESC84100HP. This is a high voltage travel regulator. It opens up new possibilities for designers. The device is designed for professional use. It is suitable for powerful quadcopters and drones. The model is designed for voltage up to 84V. This is significantly higher than the standard 6S.

The regulator can withstand 100A direct current. Peak load reaches 120A. Such parameters are required for heavy devices. You will be able to use large and powerful motors. This guarantees stable operation under load. The controller is suitable for serious tasks.

Key Features and Design

The main feature is working with high voltage. The 84V power supply allows you to reduce the current in the power circuit. This increases the overall efficiency of the system. The regulator supports both types of motors. It works with Sensorless and Sensored engines. This provides flexibility in drone design.

The controller board has a rugged design. It is integrated into an aluminum housing. This case acts as an effective radiator. It removes heat from powerful components. This solution provides reliable cooling. Even during prolonged operation, overheating is unlikely.

The manufacturer used high-quality components. The circuit uses powerful MOSFET transistors. They minimize energy losses during switching. This improves smoothness and efficiency. The controller has advanced protection systems. They protect the device from emergency situations.

Five main advantages 

• High operating voltage of 84V to reduce current loads and increase efficiency.

• Power 100A (peak 120A) to work with the most demanding motors.

• Universal support for both Sensorless and Sensored brushless motors.

• Durable aluminum housing that acts as an effective heat sink.

• A set of protections against overload, overheating and short circuit.

Applications and reliability

This ESC is ideal for complex projects. It is suitable for heavy cargo drones. Also for large racing copters. It is chosen for professional aerial photography. The model copes with high dynamic loads. This solution is for experienced designers.

The device provides a smooth and confident start. It works stably at low speeds. This is critical for accurate positioning of the device. The reliability of the components guarantees a long service life. You can trust your drone to fly.

Specifications

• Voltage: 14-84V (4-20S)
• DC current: 84 V / 100 A (Values vary depending on installation, ambient temperature and
• air circulation around the device!)
• Maximum current: 200A
• Firmware: VESC_TOOL available, version 6.02, supports firmware upgrade
• ERPM: 150000
• Control Interface Ports: USB, CAN, UART, ADC, I2C
• BEC: 5 V at 1 A
• Modes: DC, BLDC, FOC (sinusoidal)
• Supported sensors: ABI, HALL, AS5047, AS5048A
• Sensorless motor support: Yes
• Input support: PPM, ADC, NRF, UART
• Power Wire Size: 8 AWG
• Size: 93×66.4×28 mm.