ブラシレス モーター iPower GM4108H-120T

Buy an iPower GM4108H-120T engine and enjoy using your drone

Do you want to purchase a powerful engine for quadcopter, which would cope with any weather conditions and provide a long service life? The iPower GM4108H-120T motor is perfect for this. With it you can make long flights and not worry about an early breakdown.

High efficiency and engine power for your UAV

The iPower GM4108H-120T engine is widely used by both beginners and professionals. This is achieved due to its technical characteristics:

• Model: GM4108H
• Motor output diameter: F47±0.05 mm
• Motor height: 22.7.3±0.2mm
• Hollow shaft (outer diameter): F10-0.008/-0.012 mm
• Hollow shaft (inner diameter): 8 0.05/0 mm
• Wire length: 265±3mm
• Cable AWG: #24
• Motor weight: 124±0.5g
• Wire plug: 2.5mm dupont connector
• No-load current: 20V
• Idle Volt: 0.07±0.1A
• No-load rpm: 513~567 rpm
• Load current: 20V
• Load Volt: 1.5 A
• Load torque (g): 1200-1800
• Motor internal resistance: 11.1 ohm ± 5% (resistance depends on temperature)
• High voltage test: DC500V 1mA@2sec
• Rotor housing runout: ≤0.1mm
• Steering (axle extension): Clockwise

In addition, the iPower GM4108H-120T engine has successfully passed temperature tests and is capable of operating in cold or hot conditions:

• High temperature: keep at 60℃ for 100 hours, and the engine can work normally after 24 hours at room temperature.
• Low temperature: keep at -20℃ for 100 hours, and the engine can work normally after 24 hours at room temperature.
• Maximum power: ≤25W
• Working current: 3-5S
• Operating temperature: -20~60℃; 10~90%RH

Buy this powerful engine on the AEGISKY.COM online store website.