1 点の商品
Ensure accurate navigation and safe recovery of your vehicle. Matsutec ais receivers are specialized positioning and AIS modules. They provide the drone with precise coordinates and data about the surrounding environment. These devices are critical for autonomous flight over water and difficult terrain. You will always know where your drone is and can return it home.
High accuracy of coordinate determination with GPS/GLONASS support.
Integration of AIS receiver for maritime traffic monitoring.
Reliable operation in difficult weather conditions and at a distance.
Alarm function and return to the starting point in case of signal loss.
Durable and often waterproof housing for professional use.
The Matsutec receiver performs two key functions. Firstly, this is a high-precision GPS/GLONASS module. It receives signals from satellites and calculates the drone's location. Determines its coordinates, altitude, speed and course. This information is sent to the flight controller for navigation.
Secondly, it is an Automatic Identification System (AIS) receiver. It receives radio signals from ships nearby. Decodes them and transmits data about vessels (position, course, speed) to the operator. This allows the drone to “see” maritime traffic and avoid collisions. This is especially important when flying over ports or navigable rivers.
The ais Matsutec line includes several specialized devices. For example,Matsutec HP-33Ais a classic GPS receiver. It has a built-in high gain antenna. Supports GPS and GLONASS satellite systems for fast capture.
The device connects to the flight controller via the NMEA 0183 protocol. Or via a standard UART serial interface. It provides positioning accuracy in the region of 2-3 meters. This is sufficient for most navigation tasks and autonomous missions.
More advanced model -Matsutec HA-102. This is a combined GPS and AIS receiver. It simultaneously tracks satellites and ships within range. The reception range of AIS signals reaches 10-15 nautical miles.
The receiver has two independent outputs: NMEA GPS and NMEA AIS. Data can be displayed on the ground station screen or in an application. You can see both your drone and the ships moving around it on the map.
The main function is to ensure the operation of the Return to Home (RTH) mode. If the signal from the remote control is lost or the battery is critically low, the controller uses the coordinates. It takes them from the Matsutec receiver for autonomous return. The drone flies back to its take-off point and lands.
For professional aerial photography and cartography, positioning stability is important. The receiver provides precise position hold. This allows you to take clear shots and build accurate orthomosaics.
The AIS receiver turns the drone into a marine monitoring tool. You can remotely inspect ships and monitor traffic in the port. Or use a drone to search for vessels that are not transmitting an AIS signal (smuggling).
Matsutec products are designed for serious tasks. It is used by operators of commercial unmanned systems. For monitoring sea and river areas, oil and gas platforms. In scientific research to monitor marine fauna.
It is in demand in search and rescue services. To search for people and ships at sea, especially in poor visibility conditions. It is also used in amateur robotics to create autonomous boats. Or drones for fishing and ice reconnaissance.
This is not a component for racing or freestyle drones. Its weight, dimensions and functionality are excessive for such tasks. But for long-distance missions over water or far from civilization, it is indispensable.
The connection is usually made through a serial port (UART). You need to connect the RX/TX pins of the receiver to the corresponding pins of the controller. And also supply power, usually 5V or 12V depending on the model.
You need to enable this port in the flight controller software settings (ArduPilot, PX4). Specify it as a GPS data source (NMEA or uBlox protocol). When using AIS, data can be output to a separate telemetry channel.
It is important to place the receiver antenna correctly on the drone. It should have a clear view of the sky, without interference from carbon parts. It is often carried on a rod or mounted on the top of the body.